Результаты поиска - Marco Antônio Bottino

Evaluation of the shear bond strength of the union between two CoCr-alloys and a dental ceramic Avaliação da resistência ao cisalhamento da união entre duas ligas a base de CoC... по Mariana Pretti, Edson Hilgert, Marco Antônio Bottino, Rander Pereira Avelar

Connect to this object online.

Marginal fit of electroformed copings before and after the coction of the porcelain по Leonardo Buso, Edson Hilgert, Maximiliano Piero Neisser, Marco Antonio Bottino

Connect to this object online.

Evaluation of marginal adaptation of ceramic crowns depending on the marginal design and the addition of ceramic по Edson Hilgert, Leonardo Buso, Maximiliano Piero Neisser, Marco Antonio Bottino

Connect to this object online.

The fitness of copings constructed over UCLA abutments and the implant, constructed by different techniques: casting and casting with laser welding Adaptação de copings de ritân... по Elza Maria Valadares da Costa, Luciana Satie Hoçoya, Marco Antônio Bottino

Connect to this object online.

Bonding to densely sintered alumina- and glass infiltrated aluminum / zirconium-based ceramics Adesão a uma cerâmica aluminizada densamente sinterizada e a uma cerâmica a base d... по Luiz Felipe Valandro, André Mallmann, Alvaro Della Bona, Marco Antonio Bottino

Connect to this object online.

Multiple-unit implant frames: one-piece casting vs. laser welding and brazing Sobre estruturas de implantes múltiplos: fundição em monobloco versus soldagem a laser e brasagem... по Elza Maria Valadares da Costa, Maximiliano Piero Neisser, Marco Antônio Bottino

Connect to this object online.

Evaluation of shear bond strength and shear stress on zirconia reinforced lithium silicate and high translucency zirconia по Amanda Maria de Oliveira Dal Piva, João Paulo Mendes Tribst, Marco Antonio Bottino

Connect to this object online.

Bond characteristics of porcelain fused to cast and milled titanium по Karina Andrea Novaes Olivieri, Maximiliano Piero Neisser, Marco Antônio Bottino, Milton Edson Miranda

Connect to this object online.

Mechanical properties and micro structural analysis of a NiCr alloy cast under different temperatures по Karina Andrea Novaes Olivieri, Maximiliano P. Neisser, Paulo C. R. Souza, Marco Antônio Bottino

Connect to this object online.

Effect of composite surface treatment and aging on the bond strength between a core build-up composite and a luting agent по Caroline COTES, Mayra CARDOSO, Renata Marques de MELO, Luiz Felipe VALANDRO, Marco Antonio BOTTINO

Connect to this object online.

Effect of grinding and heat treatment on the mechanical behavior of zirconia ceramic по Gabriela Freitas RAMOS, Gabriel Kalil Rocha PEREIRA, Marina AMARAL, Luiz Felipe VALANDRO, Marco Antonio BOTTINO

Connect to this object online.

From Denture to the Final Implant-Supported Prosthesis Using a Full-Digital Protocol: A Dental Technique по Francisco Fernando Todescan, Marcos Masayuki Hayashi, Luiz Roberto Giugni, Marco Antonio Bottino, João Paulo Mendes Tribst

Connect to this object online.

High temperature dimensional alterations of implant supported frameworks по Diego Klee Vasconcellos, Antonio Carlos Cardoso, Marco Antonio Bottino, Ricardo de Souza Magini, Wilson Andriani Jr

Connect to this object online.

Effect of thermocycling on the bond strength of a glass-infiltrated ceramic and a resin luting cement Efeito da ciclagem térmica sobre a resistência de união entre uma cerâmica... по Osvaldo Daniel Andreatta Filho, Marco Antonio Bottino, Renato Sussumu Nishioka, Luiz Felipe Valandro, Fabíola Pessoa Pereira Leite

Connect to this object online.

Influência do agente de união na resistência ao cisalhamento da interface titânio/polímero de vidro Bonding agent influence on shear bond strength of titanium/polyglass interf... по Denise Kanashiro Oyafuso, Marco Antonio Bottino, Marcos Koiti Itinoche, Anna Paula Nasraui, Elza Maria Valadares da Costa

Connect to this object online.

Effect of ceramic thickness, grinding, and aging on the mechanical behavior of a polycrystalline zirconia по Rodrigo Diniz PRADO, Gabriel Kalil Rocha PEREIRA, Marco Antonio BOTTINO, Renata Marques de MELO, Luiz Felipe VALANDRO

Connect to this object online.

Effect of implant number and height on the biomechanics of full arch prosthesis по João Paulo Mendes Tribst, Amanda Maria de Oliveira Dal Piva, Alexandre Luiz Souto Borges, Marco Antonio Bottino

Connect to this object online.

Influence of crown and hybrid abutment ceramic materials on the stress distribution of implant-supported prosthesis по João Paulo Mendes TRIBST, Amanda Maria de Oliveira DAL PIVA, Alexandre Luiz Souto BORGES, Marco Antonio BOTTINO

Connect to this object online.

Study of thermocycling effect on the bond strength between an aluminous ceramic and a resin cement Estudo do efeito da ciclagem térmica na resistência da união adesiva entre uma... по Osvaldo Daniel Andreatta Filho, Maria Auxiliadora Junho de Araújo, Marco Antonio Bottino, Renato Sussumu Nishioka, Marcia Maciel Menezes

Connect to this object online.

The adhesive system and root canal region do not influence the degree of conversion of dual resin cement по Priscilla Cristoforides Pereira, Renata Marques de Melo, Carolina Chaves, Graziela A. P. Galhano, Marco Antonio Bottino, Ivan Balducci

Connect to this object online.