Effect of Cooling Rate on the Longitudinal Modulus of Cu3Sn Phase of Ag-Sn-Cu Amalgam Alloy (Part II)
Effects of cooling rate (at the time of solidification on the elastic constants of Cu<sub>3</sub>Sn phase of Ag-Sn-Cu dental amalgam alloy were studied. In this study, three types of alloys were made, with the composition Cu-38-37 wt% Sn by means of casting, where each alloy was subjecte...
Saved in:
| Main Author: | |
|---|---|
| Format: | Book |
| Published: |
Faculty of Dentistry, Universitas Indonesia,
2015-10-01T00:00:00Z.
|
| Subjects: | |
| Online Access: | Connect to this object online. |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Effects of cooling rate (at the time of solidification on the elastic constants of Cu<sub>3</sub>Sn phase of Ag-Sn-Cu dental amalgam alloy were studied. In this study, three types of alloys were made, with the composition Cu-38-37 wt% Sn by means of casting, where each alloy was subjected to different cooling rate, such as cooling on the air (AC), air blown (AB), and quenched in the water (WQ). X-ray diffraction, metallography, and Scanning Electron Microscopy with Energy Dispersive Spectroscopy studies of three alloys indicated the existence of Cu<sub>3</sub>Sn phase. Determination of the modulus of elasticity of Cu<sub>3</sub>Sn (ε) phase was carried out by the measurement of longitudinal and transversal waves velocity using ultrasonic technique. The result shows that Cu<sub>3</sub>Sn (ε) phase on AC gives higher modulus of elasticity values than those of Cu<sub>3</sub>Sn (ε) on AB and WQ. The high modulus of elasticity value will produce a strong Ag-Sn-Cu dental amalagam alloy. |
|---|---|
| Item Description: | 1693-9697 2355-4800 10.14693/jdi.v5i3.776 |