A Pre-Gelled EEG Electrode and Its Application in SSVEP-Based BCI

• Үндсэн зохиолчид: Weihua Pei (Зохиогч), Xiaoting Wu (Зохиогч), Xiang Zhang (Зохиогч), Aihua Zha (Зохиогч), Sen Tian (Зохиогч), Yijun Wang (Зохиогч), Xiaorong Gao (Зохиогч)
• Формат: Ном
• Хэвлэсэн: IEEE, 2022-01-01T00:00:00Z.
• Нөхцлүүд: article
• Онлайн хандалт: Connect to this object online.

Тойм

Electroencephalogram (EEG) electrodes are critical devices for brain-computer interface and neurofeedback. A pre-gelled (PreG) electrode was developed in this paper for EEG signal acquisition with a short installation time and good comfort. A hydrogel probe was placed in advance on the Ag/AgCl electrode before wearing the EEG headband instead of a time-consuming gel injection after wearing the headband. The impedance characteristics were compared between the PreG electrode and the wet electrode. The PreG electrode and the wet electrode performed the Brain-Computer Interface (BCI) application experiment to evaluate their performance. The average impedance of the PreG electrode can be decreased to 43 <inline-formula> <tex-math notation="LaTeX">$\text{k}\Omega $ </tex-math></inline-formula> or even lower, which is higher than the wet electrode with an impedance of 8 <inline-formula> <tex-math notation="LaTeX">$\text{k}\Omega $ </tex-math></inline-formula>. However, there is no significant difference in classification accuracy and information transmission rate (ITR) between the PreG electrode and the wet electrode in a 40 target BCI system based on Steady State Visually Evoked Potential (SSVEP). This study validated the efficiency of the proposed PreG electrode in the SSVEP-based BCI. The proposed PreG electrode will be an excellent substitute for wet electrodes in an actual application with convenience and good comfort.

Зүйлийн тодорхойлолт

1558-0210
10.1109/TNSRE.2022.3161989