Three-dimensional misfit between Ti-Base abutments and implants evaluated by replica technique
Abstract An important factor affecting the biomechanical behavior of implant-supported reconstructions is the implant-abutment misfit. Objective: This study evaluated the misfit between Ti-Base abutments and implants by means of polyvinyl siloxane replica technique using microcomputed tomography (μC...
Saved in:
Main Authors: | Karina Bergamo Cardoso (Author), Edmara Tatiely Pedroso Bergamo (Author), Vitor De Moraes Cruz (Author), Ilana Santos Ramalho (Author), Lucas Fracassi De Oliveira Lino (Author), Estevam Augusto Bonfante (Author) |
---|---|
Format: | Book |
Published: |
University of São Paulo.
|
Subjects: | |
Online Access: | Connect to this object online. |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Misfit and fracture load of implant-supported monolithic crowns in zirconia-reinforced lithium silicate
by: Rafael Soares GOMES, et al. -
Reliability and Failure Mode of Ti-Base Abutments Supported by Narrow/Wide Implant Systems
by: Ernesto B. Benalcázar-Jalkh, et al.
Published: (2023) -
Marginal misfit of heat-pressed milled wax-pattern and CAD/CAM crowns and its effect on stress distribution in implant-supported rehabilitations
by: Michele Costa de Oliveira Ribeiro, et al.
Published: (2021) -
Comparison of misfit and roughness of CAD-CAM ZrO, selective laser sintered CoCr and preformed Ti implant abutment crowns
by: Fahim Vohra, et al.
Published: (2024) -
Effect of cyclic load on vertical misfit of prefabricated and cast implant single abutment
by: Rudys Rodolfo de Jesus Tavarez, et al.
Published: (2011)