Значок книги

The effects of splinting periodontally compromised removable partial denture abutments on bone stresses: a three-dimensional finite element study

Periodontally compromised abutments complicate the treatment plan of distal extension removable partial dentures. The objectives of this study were: (1) to determine if splinting a tooth with reduced bone height to a healthy one is beneficial to the weak one; (2) to investigate fixed splinting of tw...

Полное описание

Сохранить в:

Библиографические подробности
Главные авторы:	Allahyar Geramy (Автор), Mehdi Adibrad (Автор), Mahasti Sahabi (Автор)
Формат:	‌
Опубликовано:	Elsevier, 2010-03-01T00:00:00Z.
Предметы:	article
Online-ссылка:	Connect to this object online.
Метки:	Добавить метку Нет меток, Требуется 1-ая метка записи!

Схожие документы

Three Dimensional Finite Element Analysis of Distal Abutment Stresses of Removable Partial Dentures with Different Retainer Designs
по: Simindokht Zarrati, и др.
Опубликовано: (2016)

Effects of Length and Inclination of Implants on Terminal Abutment Teeth and Implants in Mandibular CL1 Removable Partial Denture Assessed by Three-Dimensional Finite Element Analysis
по: Amir Fayaz, и др.
Опубликовано: (2016)

Biomechanical effects of platform switching in two different implant systems: a three-dimensional finite element analysis.
по: Mahasti Sahabi, и др.
Опубликовано: (2013)

Influence of Implant Position on Stress Distribution in Implant-Assisted Distal Extension Removable Partial Dentures: A 3D Finite Element Analysis.
по: Yeganeh Memari, и др.
Опубликовано: (2014)

Effect of the number of implants on stress distribution of anterior implant-supported fixed prostheses combined with a removable partial denture: a finite element analysis.
по: Minoo Mahshid, и др.
Опубликовано: (2014)

Comparison of Stress and Strain Distribution around Splinted and Non-splinted Teeth with Compromised Periodontium: A Three-dimensional Finite Element Analysis
по: Reza Amid, и др.
Опубликовано: (2018)

Finite Element Analysis of Restored Principal Abutment in Free-End Saddle Partial Denture
по: Mahrous A, и др.
Опубликовано: (2022)

Stress distribution among periodontally compromised abutments: A comparative study using three-dimensional finite element analysis
по: Rajkiran Chitumalla, и др.
Опубликовано: (2012)

The influence of removable partial dentures on the periodontal health of abutment and non-abutment teeth
по: Roxana Sadeghamalnikraftar, и др.
Опубликовано: (2019)

Evaluation and comparison of stress distribution around periodontally compromised mobile teeth splinted with different materials: Three-dimensional finite element analysis
по: Farhan Durrani, и др.
Опубликовано: (2019)

Fixed versus Removable Appliance for Palatal Expansion; A 3D Analysis Using the Finite Element Method.
по: Allahyar Geramy, и др.
Опубликовано: (2014)

Stresses around a miniscrew. 3-D analysis with the finite element method (FEM)
по: Geramy Allahyar
Опубликовано: (2023)

Clinical evaluation of isolated abutment teeth in removable partial dentures
по: Zarrati S, и др.
Опубликовано: (2011)

Number of dental abutments influencing the biomechanical behavior of tooth‒implant-supported fixed partial dentures: A finite element analysis
по: Janaina Cordeiro de Oliveira, и др.
Опубликовано: (2020)

Periodontal ligament influence on the stress distribution in a removable partial denture supported by implant: a finite element analysis
по: Carlos Marcelo Archangelo, и др.
Опубликовано: (2012)

Stress Distribution in 5-Unit Fixed Partial Dentures with a Pier Abutment and Rigid and Nonrigid Connectors with Two Different Occlusal Schemes: A Three-Dimensional Finite Element Analysis
по: Behnaz Ebadian, и др.
Опубликовано: (2023)

Effect of Extension and Type of Composite-Restored Class II Cavities on Biomechanical Properties of Teeth: A Three Dimensional Finite Element Analysis.
по: Azam Valian, и др.
Опубликовано: (2015)

Three-dimensional finite element analysis of three internal tapered implant-abutment designs
по: Geninho THOMÉ, и др.
Опубликовано: (2023)

A Survey of Removable Partial Denture (RPD) Retentive Elements in Relation to Type of Edentulism and Abutment Teeth in Commercial Laboratories in Athens
по: Nick Polychronakis, и др.
Опубликовано: (2014)

Effect of Number and Location on Stress Distribution of Mini Dental Implant-Assisted Mandibular Kennedy Class I Removable Partial Denture: Three-Dimensional Finite Element Analysis
по: Wissanee Jia-mahasap, и др.
Опубликовано: (2022)

Anterior Teeth Splinting After Orthodontic Treatment: 3D Analysis Using Finite Element Method.
по: A Geramy, и др.
Опубликовано: (2012)

An expansion to the Nägerl's theory of proportionality in reduced alveolar bone height models: a 3D finite element analysis
по: Allahyar Geramy, и др.
Опубликовано: (2022)

Effect of clear aligner type on maxillary full-arch intrusion: 3D analysis using finite element method
по: Allahyar Geramy, и др.
Опубликовано: (2024)

Simple technique to fabricate a crown for abutment of an existing cast partial removable denture
по: Shefali Singla, и др.
Опубликовано: (2019)

PRINCIPLES OF THE FINITE ELEMENT ANALYSIS IN THE DESIGN MODELLING OF THE METALLIC REMOVABLE DENTURES
по: Agop-Forna Doriana, и др.
Опубликовано: (2019)

Finite element method (FEM) analysis of the force systems produced by asymmetric inner headgear bows
по: Geramy Allahyar, и др.
Опубликовано: (2011)

Asymmetric Outer Bow Length and Cervical Headgear Force System: 3D Analysis Using Finite Element Method
по: Allahyar Geramy, и др.
Опубликовано: (2015)

Stress distribution and patient satisfaction in flexible and cast metal removable partial dentures: Finite element analysis and randomized pilot study
по: Niraj Kumar, и др.
Опубликовано: (2021)

Comparison of methods used to correct a lingually tilted mandibular molar: 3-D analysis using the finite element method (FEM)
по: Geramy Allahyar, и др.
Опубликовано: (2023)

Comparative effect of implant-abutment connections, abutment angulations, and screw lengths on preloaded abutment screw using three-dimensional finite element analysis: An in vitro study
по: Krishna Chaitanya Kanneganti, и др.
Опубликовано: (2018)

The effectiveness of adding a supporting implant in stress distribution of long span fixed partial denture (three-dimensional finite element analysis)
по: Rami Shurbaji Mozayek, и др.
Опубликовано: (2016)

Influence of the Angle of Cervical Convergence on Stresses to the PDL of Abutments: A 3D Analysis Using Finite Element Method
по: A. Geramy, и др.
Опубликовано: (2007)

A Nonlinear Three-Dimensional Finite Element Analysis of Stress Distribution and Microstrain Evaluation in Short Dental Implants with Three Different Implant-Abutment Connections in Single and Splinted Conditions in the Posterior Mandible
по: Karishma S. Talreja, и др.
Опубликовано: (2023)

The effect of implant and abutment diameter on peri-implant bone stress: A three-dimensional finite element analysis
по: Helen Mary Abraham, и др.
Опубликовано: (2016)

Evaluation of different models of intrusive force application and temporary anchorage device (TAD) placement in total arch intrusion using clear aligners; a finite element analysis
по: Allahyar Geramy, и др.
Опубликовано: (2023)

Finite element analysis of occlusal splint therapy in patients with bruxism
по: Seifollah Gholampour, и др.
Опубликовано: (2019)

Impact of implant location on load distribution of implant-assisted removable partial dentures: a review of in vitro model and finite-element analysis studies
по: Hiromi Ichikawa, и др.
Опубликовано: (2023)

Correction: Evaluation of different models of intrusive force application and temporary anchorage device (TAD) placement in total arch intrusion using clear aligners; a finite element analysis
по: Allahyar Geramy, и др.
Опубликовано: (2023)

Comparison of stress patterns and displacement in conventional cantilever fixed partial denture with resin bonded cantilever fixed partial denture: A finite element analysis
по: Prashanti E, и др.
Опубликовано: (2010)

Displacement and force distribution of splinted and tilted mandibular anterior teeth under occlusal loads: an in silico 3D finite element analysis
по: Allahyar Gerami, и др.
Опубликовано: (2016)