कवर छवि

Internal fit of two all-ceramic systems and metal-ceramic crowns

OBJECTIVES: The aim of this study was to investigate the internal fit (IF) of glass-infiltrated alumina (ICA - In-Ceram Alumina), yttria-stabilized tetragonal zirconia polycrystals (Y-TZP - IPS e.max ZirCAD), and metal-ceramic (MC - Ni-Cr alloy) crowns. MATERIAL AND METHODS: Sixty standardized resin...

पूर्ण विवरण

में बचाया:

ग्रंथसूची विवरण
मुख्य लेखकों:	Leandro Moura Martins (लेखक), Fabio Cesar Lorenzoni (लेखक), Alcides Oliveira de Melo (लेखक), Luciana Mendonça da Silva (लेखक), José Luiz G. de Oliveira (लेखक), Pedro Cesar Garcia de Oliveira (लेखक), Gerson Bonfante (लेखक)
स्वरूप:	पुस्तक
प्रकाशित:	University of São Paulo, 2012-04-01T00:00:00Z.
विषय:	article
ऑनलाइन पहुंच:	Connect to this object online.
टैग:	टैग जोड़ें कोई टैग नहीं, इस रिकॉर्ड को टैग करने वाले पहले व्यक्ति बनें!

समान संसाधन

Fit of metal-ceramic crowns
द्वारा: Patrícia Valéria Manozzo Kunz, और अन्य
प्रकाशित: (2021)

In vitro evaluation of the marginal fit of different all-ceramic crowns
द्वारा: Munir Tolga Yucel, और अन्य
प्रकाशित: (2013)

Marginal Strength of Collarless Metal Ceramic Crown
द्वारा: Sikka Swati, और अन्य
प्रकाशित: (2010)

Influence of marginal fit and cement types on microleakage of all-ceramic crown systems
द्वारा: Ece Yüksel, और अन्य
प्रकाशित: (2011)

All-Ceramic Crown Tooth Preparation and Provisional Crown Fabrication
द्वारा: Cecilia Aragon
प्रकाशित: (2009)

A comparison between the effect of All-Ceramic and metal-ceramic restorations on the plaque accumulation
द्वारा: Ezatollah Jalalian, और अन्य
प्रकाशित: (2015)

Chairside Fabrication of an All-Ceramic Partial Crown Using a Zirconia-Reinforced Lithium Silicate Ceramic
द्वारा: Sven Rinke, और अन्य
प्रकाशित: (2016)

"Effect of Palatal Metal Collar's Height on Fracture Resistance of Single Metal-Ceramic Crowns"
द्वारा: Nour Aburaisi, और अन्य
प्रकाशित: (2022)

Comparison of fiber-reinforced composite crowns and metal ceramic crowns according to attrition of opposing teeth
द्वारा: Tareq Hassan, और अन्य
प्रकाशित: (2014)

Recent Advances in Metal, Ceramic, and Metal-Ceramic Composite Films/Coatings
प्रकाशित: (2022)

Preparation Junctions for All-Ceramic CAD/CAM Crown and Bridge Restorations
द्वारा: Vlahova Angelina
प्रकाशित: (2016)

Comparison of internal fit of metal‐ceramic crowns in CAD/CAM and lost‐wax techniques in all fabrication stages through replica weighting, triple scanning, and scanning electron microscope
द्वारा: Sina Mohammadi Sadr, और अन्य
प्रकाशित: (2022)

Influence of various fabrication techniques and porcelain firing on the accuracy of metal-ceramic crowns
द्वारा: İlknur Usta Kutlu, और अन्य
प्रकाशित: (2024)

Longevity of metal-ceramic crowns cemented with self-adhesive resin cement: a prospective clinical study
द्वारा: Lucas Pradebon BRONDANI, और अन्य
प्रकाशित: (2017)

Influence of different surface treatment on bonding of metal and ceramic Orthodontic Brackets to CAD-CAM all ceramic materials
द्वारा: Satheesh B. Haralur, और अन्य
प्रकाशित: (2023)

Fracture resistance of metal-ceramic crown copings cemented to two types of intra-radicular posts
द्वारा: Priscila Alonso HENRIQUES, और अन्य

Marginal fit of all-ceramic crowns fabricated using two extraoral CAD/CAM systems in comparison with the conventional technique
द्वारा: Alqahtani F
प्रकाशित: (2017)

The Marginal Fitness of CAD/CAM All Ceramic Crowns Constructed by Two Typesof Direct Digitization Techniques (An In Vitro Study)
द्वारा: Rana M Khdeir, और अन्य
प्रकाशित: (2016)

Restoring endodontically treated teeth with all-ceramic endo-crowns: Case report
द्वारा: Veselinović Valentina, और अन्य
प्रकाशित: (2008)

Influence of surface treatment and cyclic loading on the durability of repaired all-ceramic crowns
द्वारा: Ahmed Attia
प्रकाशित: (2010)

Comparison between deep chamfer and 135 ̊ tooth preparation designs on marginal fit and marginal gap in posterior metal-ceramic crowns
द्वारा: Pooya Jannati, और अन्य
प्रकाशित: (2020)

Treatment of abraded teeth using metal free ceramics and conventional metal-ceramic restorations
द्वारा: Bošković Mirjana V.
प्रकाशित: (2012)

Evaluation of marginal adaptation of ceramic crowns depending on the marginal design and the addition of ceramic
द्वारा: Edson Hilgert, और अन्य
प्रकाशित: (2015)

Metal-ceramic dowel crown restorations for severely damaged teeth: A clinical report
द्वारा: Yuzugullu Bulem, और अन्य
प्रकाशित: (2009)

Cervical end preparation design on collarless metal ceramic crown to the decrease of bacterial colony
द्वारा: Edy Machmud
प्रकाशित: (2010)

The evaluation and comparison of marginal adaptation in metal ceramic and all ceramic restorations fabricated by two methods: CAD/CAM and conventional
द्वारा: Ahmad Ghahremanloo, और अन्य
प्रकाशित: (2018)

All-Ceramic Reconstructions
द्वारा: R. Mounajjed, और अन्य
प्रकाशित: (2018)

Evaluation of internal fit of press ceramic and porous structured cobalt-chromium crown fabricated by additive manufacturing
द्वारा: Eun-Jeong Bae, और अन्य
प्रकाशित: (2022)

Effect of Cosmetic Ceramics on Fracture Toughness of All-Ceramic Restorations
द्वारा: Sibel Cetik, और अन्य
प्रकाशित: (2018)

Development and validation of an assessment sheet for all-ceramic crown preparations: A methodological study
द्वारा: Ahmed Mhanni, और अन्य
प्रकाशित: (2023)

In Vitro Evaluation of Marginal Adaptability of Zirkonzahn Metal Ceramic Crowns Before and After Porcelain Firing
द्वारा: Hossein Kermani, और अन्य
प्रकाशित: (2010)

Internal fit and marginal adaptation of all-ceramic implant-supported hybrid abutment crowns with custom-milled screw-channels on Titanium-base: in-vitro study
द्वारा: Marwa Wagih Zaky Fouad Fakhr, और अन्य
प्रकाशित: (2024)

Strength of monolithic ceramic crowns supported by incisors
द्वारा: N. R. Usubova
प्रकाशित: (2022)

Dental ceramics and the molar crown testing ground
द्वारा: Van P. Thompson, और अन्य
प्रकाशित: (2004)

Marginal and internal fit of full ceramic crowns milled using CADCAM systems on cadaver full arch scans
द्वारा: János Vág, और अन्य
प्रकाशित: (2020)

All-ceramic materials in dentistry
द्वारा: Samarjit Singh Teja, और अन्य
प्रकाशित: (2015)

Effects of different removal methods of excess resin adhesive on the microleakage of alumina all-ceramic crowns
द्वारा: Haiyang Zhang, और अन्य
प्रकाशित: (2023)

The Effect of Marginal Preparation Type on an All-Ceramic Anterior Crown: A Finite Element Study
द्वारा: Ayşe Gözde Türk
प्रकाशित: (2017)

Influence of different zirconia coping designs on the fracture resistance of all-ceramic crowns: An in vitro study
द्वारा: Sanath K Shetty, और अन्य
प्रकाशित: (2020)

Comparison of the Marginal Fitness of the Ceramic Crowns Fabricated with Different CAD/CAM Systems (An In Vitro Study)
द्वारा: Akram M. Abdulkareem, और अन्य
प्रकाशित: (2016)