Comparison of surface roughness of nanofill and nanohybrid composite resin polished by aluminum oxide and diamond particle paste
Introduction: The adequate finishing and polishing procedures might occur the restoration longivity, the color retention, and the good integrating with the surrounding environment. Methods: This study was conducted to determine the surface roughness of the nanofill composite with the nanohybrid comp...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Book |
| Published: |
Universitas Padjadjaran,
2017-07-01T00:00:00Z.
|
| Subjects: | |
| Online Access: | Connect to this object online. |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Introduction: The adequate finishing and polishing procedures might occur the restoration longivity, the color retention, and the good integrating with the surrounding environment. Methods: This study was conducted to determine the surface roughness of the nanofill composite with the nanohybrid composite polished by the aluminum oxide pastes and diamond polishing paste. This study was a pure experimental-in vitro study. The results of polishing on the resin composite surfaces was observed using the optical microscope at 500x magnification and given the score. The Krusskal-Wallis test was conducted to depict the data analysis. Result: The results showed that the resin composite group of the nanohybrid polished by both aluminum oxide and diamond particle had smoother surface than the resin composite of the nanofill. Conclusion: The conclusions of this study depicted that there were differences of polishing results using the aluminium oxide and diamond particle paste between the nanofill and nanohybrid resin composite surface roughness. |
|---|---|
| Item Description: | 1979-0201 2549-6212 10.24198/pjd.vol29no2.13659 |