Torsional Resistance of Two New Heat Treated Nickel Titanium Rotary Instruments: An in Vitro Evaluation

• Hoofdauteurs: Gianluca Gambarini (Auteur), Gabriele Miccoli (Auteur), Dario Di Nardo (Auteur), Andrea Del Giudice (Auteur), Alessandro Mazzoni (Auteur), Marco Seracchiani (Auteur), Luca Testarelli (Auteur)
• Formaat: Boek
• Gepubliceerd in: Association of Support to Oral Health Research (APESB), 2022-03-01T00:00:00Z.
• Onderwerpen: article
• Online toegang: Connect to this object online.
• Notes: 1519-0501; 1983-4632
• Keywords: Endodontics; Dental Alloys; Torsion, Mechanical; Torque; Dentistry; RK1-715
• Source: Pesquisa Brasileira em Odontopediatria e Clínica Integrada, Vol 20 (2022)

Objective: To evaluate the difference in torsional resistance, angular deflection and fragment length between two new rotary instruments: AF Blue S4 and S-One. These files share all features except cross- sectional design. Material and Methods: A total of 40 new Nickel-Titanium instruments of 25 mm in length were tested in this study and divided in two groups: 20 AF Blue S4, tip 25 and constant 6% taper and 20 AF-Blue S4 tip 25 and constant 6% taper. The torsional test was performed by the use of a torque recording endodontic motor (KaVo, Biberac, Germany). Torque to Fracture (TtF), Angular Deflection (AD) and Fragment Length (FL) was recorded for each instrument. To ensure an immovable block at 3mm of the instrument tip, an auto-polymerizing resin (DuraLay; Reliance Dental Mfg Co, Worth, IL) was used. Each file was rotated clockwise at a speed of 300 rpm until fracture occurred. Results: Group A (AF Blue S4) showed higher TtF and AD than Group B (S-One), and statistical analysis found significant differences between the two instruments (p<0.05). The mean values for FL showed no significant differences (p>0.05) between the two instruments. Conclusion: The AF Blue S4 seems to have a higher resistance to torsional stress in vitro. Clinically, the use of AF Blue S4 could be safer in narrow canals.