Beeld op de omslag

Particle size and injection temperature effect on the injection molding of SS316L powder / Khairur Rijal Jamaludin ... [et al.]

Particle size and injection temperature influence on the injection of SS316L powder has been investigated. The feedstocks used for the investigation being 64 vol. % and 65 vol. %. Results found that the success of the molding process depends on the feedstock rheological properties. Fine powder parti...

Volledige beschrijving

Bewaard in:

Bibliografische gegevens
Formaat:	Boek
Gepubliceerd in:	Faculty of Mechanical Engineering and University Publication Centre (UPENA), 2008.
Onderwerpen:	Article PeerReviewed
Online toegang:	Link Metadata
Tags:	Voeg label toe Geen labels, Wees de eerste die dit record labelt!

Gelijkaardige items

The study of sintering behavior of stainless steel 17-4PH-stainless steel 316L for two materials powders injection molding (2C-PIM) process / Najlaa Nazihah Mas'ood...[et al.]
door: Mas'ood, Najlaa Nazihah, et al.
Gepubliceerd in: (2019)

Determination of Critical Powder Loading of Titanium-Hydroxyapatite with Powder Space Holder for Powder Injection Molding Feedstocks / Mohd Yusuf Zakaria...[et al.]
door: Zakaria, Mohd Yusuf, et al.
Gepubliceerd in: (2017)

Evaluation of the safety and efficiency of novel metallic implant scaler tips manufactured by the powder injection molding technique
door: Kyung A. Chun, et al.
Gepubliceerd in: (2017)

Some Critical Issues for Injection Molding
Gepubliceerd in: (2012)

Effect of particle size and resin content on leucaena leucocephala particleboard properties / Jamaludin Kasim ...[et al.]
door: Kasim, Jamaludin, et al.
Gepubliceerd in: (2014)

Factors affecting liposomes particle size prepared by ethanol injection method
door: Sherif Shaker, et al.
Gepubliceerd in: (2017)

Effects of particle sizes, resin content and board density on properties of Sesendok particleboard / Jamaludin Kasim ... [et al.]
door: Kasim, Jamaludin, et al.
Gepubliceerd in: (2008)

Effect of resin particle size and wax content on the properties of oil palm board / Jamaludin Kasim ...[et al.]
door: Kasim, Jamaludin, et al.
Gepubliceerd in: (2008)

Effect of resin particle size and wax content on the properties of oil palm board / Jamaludin Kasim ... [et al.]
door: Kasim, Jamaludin, et al.
Gepubliceerd in: (2008)

Experimental analysis on grain growth kinetics of SS316l austenitic stainless steel / Muhd Faiz Mat ... [et al.]
door: Mat, Muhd Faiz, et al.
Gepubliceerd in: (2021)

Effects of particle sizes, resin content and board densities on the properties of phenol formaldehyde particleboard from oil palm trunk particles / Jamaludin Kasim ... [et al.]
door: Kasim, Jamaludin, et al.
Gepubliceerd in: (2010)

Exposure Hazard to Bisphenol A for Labor and Particle Size Distribution at Polycarbonate Molding Plants
door: Yuchan CHAO, et al.
Gepubliceerd in: (2015)

Physical and mechanical properties of pressure-molded and injection-molded denture base acrylics in different conditions
door: Yousef A Shibat Al Hamd, et al.
Gepubliceerd in: (2014)

Optimising sintering parameters on the characteristic of injection moulded 316L stainless steel utilising water soluble system / Nurul Farhana Omar ... [et al.]
door: Omar, Nurul Farhana, et al.
Gepubliceerd in: (2019)

Fiber-dependent injection molding simulation of discontinuous reinforced polymers
door: Wittemann, Florian
Gepubliceerd in: (2022)

Fiber-dependent injection molding simulation of discontinuous reinforced polymers
door: Wittemann, Florian
Gepubliceerd in: (2022)

Wear resistance of injection-molded thermoplastic denture base resins
door: Ippei Hamanaka, et al.
Gepubliceerd in: (2016)

Effect of Sintering Parameters on Physical Properties of SS 316L Alloy Compact / Mohd Faizul Farhan Ahmad Hamidi..[et al.]
door: Ahmad Hamidi, Mohd Faizul Farhan, et al.
Gepubliceerd in: (2017)

Properties of Injection Molded Nanocomposites and Blends Based on PLA, PHBV and L-CNC / Martin Borůvka...[et al.]
door: Borůvka, Martin, et al.
Gepubliceerd in: (2017)

Residual stress measurements on SS316L specimen using selective laser melting and numerical computation software / Micheal Stoschka ... [et al.]
door: Stoschka, Micheal, et al.
Gepubliceerd in: (2023)

Assessment of dimensional accuracy of preadjusted metal injection molding orthodontic brackets
door: Shiva Alavi, et al.
Gepubliceerd in: (2016)

Understanding the Multidimensional Effects of Polymorphism, Particle Size and Processing for D-Mannitol Powders
door: Lena Mareczek, et al.
Gepubliceerd in: (2022)

Effects of particle sizes, wood to cement ratio and chemical additives on the properties of sesendok (Endospermum Diadenum) cement-bonded particleboard / Jamaludin Kasim ... [et al.]
door: Kasim, Jamaludin
Gepubliceerd in: (2010)

Some selected properties of bamboo thermoplastic composite: Influence of particle size, filler loading and maleated anhydride polypropylene addition / Jamaludin Kasim ...[et al.]
door: Kasim, Jamaludin, et al.
Gepubliceerd in: (2003)

Micro Injection Molding of Drug-Loaded Round Window Niche Implants for an Animal Model Using 3D-Printed Molds
door: Robert Mau, et al.
Gepubliceerd in: (2023)

Effects of resin content, wax addition and particle sizes on the properties of eight year-old Petai Belalang (Leuceana Leucocephala) particleboard / Jamaludin Kasim ... [et al.]
door: Kasim, Jamaludin, et al.
Gepubliceerd in: (2008)

Pengaruh Parameter Waktu Tahan Terhadap Cacat Warpage Dari Produk Injection Molding
door: Prabowo, Adhy Muhammad, et al.
Gepubliceerd in: (2017)

Dimensional changes of acrylic resin denture bases: conventional versus injection-molding technique.
door: Jafar Gharechahi, et al.
Gepubliceerd in: (2014)

The effect of temperature solubility on particle size and antibacterial activity of nanosilver of gembili's inulin
door: Dian Eka Ermawati, et al.
Gepubliceerd in: (2023)

Varied Bulk Powder Properties of Micro-Sized API within Size Specifications as a Result of Particle Engineering Methods
door: Zijian Wang, et al.
Gepubliceerd in: (2022)

The Characterization and Rheological Investigation of Materials for Powder Injection Moulding / Ukwueze Bonaventure Emeka...[et al.]
door: Ukwueze, Bonaventure Emeka, et al.
Gepubliceerd in: (2017)

Prediction of the particle size and flow characteristics of powder blends for tableting by near-infrared spectroscopy and chemometrics
door: Rares Iovanov, et al.
Gepubliceerd in: (2021)

Effect of Adding Zirconium Oxide Nanoparticles on the Growth and Adhesion of Candida Albicans in the Injection Mold Acryls
door: Niloofar Baghoulizadeh, et al.
Gepubliceerd in: (2023)

Assessment of the hardness of different orthodontic wires and brackets produced by metal injection molding and conventional methods
door: Shiva Alavi, et al.
Gepubliceerd in: (2017)

Hybrid Manufacturing of Oral Solid Dosage Forms via Overprinting of Injection-Molded Tablet Substrates
door: Han Xu, et al.
Gepubliceerd in: (2023)

Flow Behaviour Characterization of Hydroxyapatite for Powder Injection Moulding (PIM) / Farrahshaida Mohd Salleh...[et al.]
door: Mohd Salleh, Farrahshaida, et al.
Gepubliceerd in: (2017)

Simple Method to Measure the Aerodynamic Size Distribution of Porous Particles Generated on Lyophilizate for Dry Powder Inhalation
door: Kahori Miyamoto, et al.
Gepubliceerd in: (2020)

Mathematical Modelling of Plastic Injection Molding Process Using Central Composite Design (CCD) Sampling and PRSM / Kausalyah V. ...[et al.]
door: V., Kausalyah, et al.
Gepubliceerd in: (2018)

Desain Dan Analisa Barrel, Screw Serta Produk Mesin Injection Molding Dengan Menggunakan Simulasi
door: Kiswantoro, Beny, et al.
Gepubliceerd in: (2017)

Analisa Pengaruh Parameter Tekanan Terhadap Cacat Warpage Dari Produk Injection Molding Berbahan Polypropylene
door: Fathoni, M. Anwar
Gepubliceerd in: (2016)