Experimental Investigation of Diesel Engine Run with Waste Cooking Oil−Petrol Blends / Idris Saad...[et al.]

This paper presents the utilization of the waste cooking oil (WCO) as fuel for diesel engine or also known as compression ignition (CI) engine. The WCO is an alternative biofuel to provide the receding supply of world crude oil as well as recycling the waste. The physiochemical properties of WCO are...

Full description

Saved in:
Bibliographic Details
Main Authors: Saad*, Idris (Author), Abdullah, Nik Rosli (Author), Ihsan Mamat, Aman Mohd (Author), Ab Rashid, Wardatul Hayah (Author), Saidon, Nur Hidayah (Author)
Format: Book
Published: Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM).
Subjects:
Online Access:Link Metadata
Tags: Add Tag
No Tags, Be the first to tag this record!

MARC

LEADER 00000 am a22000003u 4500
001 repouitm_39087
042 |a dc 
100 1 0 |a Saad*, Idris  |e author 
700 1 0 |a Abdullah, Nik Rosli  |e author 
700 1 0 |a Ihsan Mamat, Aman Mohd  |e author 
700 1 0 |a Ab Rashid, Wardatul Hayah  |e author 
700 1 0 |a Saidon, Nur Hidayah  |e author 
245 0 0 |a Experimental Investigation of Diesel Engine Run with Waste Cooking Oil−Petrol Blends / Idris Saad...[et al.] 
260 |b Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM). 
500 |a https://ir.uitm.edu.my/id/eprint/39087/1/39087.pdf 
520 |a This paper presents the utilization of the waste cooking oil (WCO) as fuel for diesel engine or also known as compression ignition (CI) engine. The WCO is an alternative biofuel to provide the receding supply of world crude oil as well as recycling the waste. The physiochemical properties of WCO are considered lower than conventional diesel fuel as its density is higher and volatility is lower. Thus the WCO is less prone to evaporate, diffuse and combust during the combustion process. As the matter of fact, the WCO cannot be used as it is because it will create clogging problem at the fuel filter and injector. Therefore, this project has mixes the WCO with conventional petrol fuel (RON95) which is lower density and higher volatility than WCO. The mixing ratio of the WCO and the RON95 was set in the range of 5 to 25 percent of volume based. Initially, the mixing fuel properties such as density and calorific value were investigated. Then, the mixes fuels were tested on the engine performance and the results are compared with the baseline diesel fuel. Based on the results found in this project, lower percentage of WCO (25% of RON95 and 75% of WCO) is suitable to be used for lower engine speed while higher percentage of WCO (5% of RON95 and 95% of WCO) produces a better result at higher engine speed. Nevertheless, the results of all fuel blends are poorer than the conventional diesel fuel. Hence, this project recommends further investigation to be made before WCO can fully utilise although it has potential to be used as fuel in diesel engine. 
546 |a en 
690 |a TJ Mechanical engineering and machinery 
655 7 |a Article  |2 local 
655 7 |a NonPeerReviewed  |2 local 
787 0 |n https://ir.uitm.edu.my/id/eprint/39087/ 
787 0 |n https://jmiw.uitm.edu.my/ 
856 4 1 |u https://ir.uitm.edu.my/id/eprint/39087/  |z Link Metadata