कवर छवि

The Study of Corrosion Behaviour of Cobalt-Iron (CoFe) Alloy Coating / Nor Fazli Adull Manan ...[et al.]

Cobalt-Iron (CoFe) nanocrystalline alloy coating were successfully electrodeposited in a sulfate bath by supplying direct current to the 304-stainless steel and AISI 1080 mild steel substrates. The objective of this research is to study the corrosion behaviour of deposited CoFe coating on the substr...

पूर्ण विवरण

में बचाया:

ग्रंथसूची विवरण
मुख्य लेखकों:	Adull Manan, Nor Fazli (लेखक), Nik Mohd Masdek, Nik Rozlin (लेखक), Abdul Aziz, Qayyum (लेखक), Salleh, Zuraidah (लेखक)
स्वरूप:	पुस्तक
प्रकाशित:	Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM), 2017.
विषय:	Article PeerReviewed
ऑनलाइन पहुंच:	Link Metadata
टैग:	टैग जोड़ें कोई टैग नहीं, इस रिकॉर्ड को टैग करने वाले पहले व्यक्ति बनें!

समान संसाधन

The effect of skin orientation on biomechanical properties / Nor Fazli Adull Manan and Jamaluddin Mahmud
द्वारा: Adull Manan, Nor Fazli, और अन्य
प्रकाशित: (2015)

Analysis of Dryness Effect on Skin by Adapting Hyperelastic Constitutive Model / Nor Fazli Adull Manan ...[et al.]
द्वारा: Adull Manan, Nor Fazli, और अन्य
प्रकाशित: (2018)

The numerical analysis of hyperelastic properties in commercial and original aloe vera gels / Nur Nabila Mohd Nazali and Nor Fazli Adull Manan
द्वारा: Mohd Nazali, Nur Nabila, और अन्य
प्रकाशित: (2021)

Corrosion Behavior of Heat Treated Nanocrystalline Co Ni Fe Coating on Stainless Steel / Koay Mei Hyie...[et al.]
द्वारा: Koay, Mei Hyie, और अन्य
प्रकाशित: (2018)

The effect of Cobalt alloy nanocrystalline coating on tensile properties and surface performance of mild steel / Mohd Zakuan Zabri, Nik Rozlin Nik Masdek and Koay Mei Hyie
द्वारा: Zabri, Mohd Zakuan, और अन्य
प्रकाशित: (2023)

The effect of pH on the corrosion rate of 316L Stainless Steel, Nitinol, and Titanium-6%Aluminum-4% Vanadium in Hank's Solution / Nik Rozlin Nik Masdek ... [et al.]
द्वारा: Nik Masdek, Nik Rozlin, और अन्य
प्रकाशित: (2021)

Synthesis of cobalt doped b-FeSi2 by mechanical alloying
द्वारा: Jamreonta Parinyataramas
प्रकाशित: (2014)

Effect of chemical passivation on corrosion behavior and ion release of a commercial chromium-cobalt alloy
द्वारा: Elnaz Moslehifard, और अन्य
प्रकाशित: (2020)

Thermal expansion and corrosion resistance of cobalt-chromium alloys fabricated by contemporary manufacturing processes. An in vitro study
द्वारा: Bonothu Balaji, और अन्य
प्रकाशित: (2022)

Corrosion of Dental Alloys
द्वारा: L. Vavřičková, और अन्य
प्रकाशित: (2007)

Antibacterial Effect of CrO and CoFe2O4 Nanoparticles upon Staphylococcus aureus
द्वारा: Saber Imani, और अन्य
प्रकाशित: (2011)

Microstructure and Corrosion Behavior of Advanced Alloys
प्रकाशित: (2022)

Cobalt-chromium alloys in fixed prosthodontics in Sweden
द्वारा: Maria Kassapidou, और अन्य
प्रकाशित: (2017)

Evaluation of macrohardness of recasted Cobalt-chromium alloy
द्वारा: Ahmed A Al-Ali
प्रकाशित: (2007)

COMPARATIVE STUDY ON THE CORROSION OF ALLOYS IN ARTIFICIAL SALIVA
द्वारा: Laurenţiu Drăguş, और अन्य
प्रकाशित: (2018)

Investigation of Microstructural and Corrosion Properties of Steels and Light Alloys
प्रकाशित: (2023)

THE CORROSION RESISTANCE OF A TITANIUM ALLOY DENTAL IMPLANT
द्वारा: Sabina David, और अन्य
प्रकाशित: (2018)

The effect of urea on the corrosion behavior of different dental alloys
द्वारा: Onur Geckili, और अन्य
प्रकाशित: (2012)

Determination of selected heavy metals in street food around Jengka area / Wan Noni Afida Ab Manan, Nik Nur Syafiqa Nik Hashim and Nur Sha'adah Zainuddin
द्वारा: Ab Manan, Wan Noni Afida, और अन्य
प्रकाशित: (2019)

Inflammatory Response to Cobalt-Chromium Alloys Fabricated With Different Techniques
द्वारा: Maria Kassapidou, और अन्य
प्रकाशित: (2021)

The effect of remelting various combinations of new and used cobalt-chromium alloy on the mechanical properties and microstructure of the alloy
द्वारा: Sharad Gupta, और अन्य
प्रकाशित: (2012)

Evaluation on the Corrosion of the Three Ni-Cr Alloys with Different Composition
द्वारा: Srinivasa B. Rao, और अन्य
प्रकाशित: (2011)

THE STUDY OF ROUGHNESS AND RESISTANCE TO CORROSION OF DENTAL ALLOYS IN THE ORAL ENVIRONMENT
द्वारा: Adina Oana Armencia, और अन्य
प्रकाशित: (2020)

An overview of the corrosion aspect of dental implants (titanium and its alloys)
द्वारा: Chaturvedi T
प्रकाशित: (2009)

MONITORING THE BEHAVIOUR OF KERA N ALLOY TO CORROSION IN AFNOR ARTIFICIAL SALIVA
द्वारा: Daniela-Mariana Calamaz, और अन्य
प्रकाशित: (2016)

Biological Tests of Chromium-cobalt Alloy Coated with Zirconium Nitride and Titanium Nitride
द्वारा: J. Vaněk, और अन्य
प्रकाशित: (2005)

Comparison of Two Different Electro Polish Temperature on Cobalt Ion Release of Chromium Cobalt Alloy in Artificial Saliva with Atomic Absorption Spectrophotometry
द्वारा: Amir Adib, और अन्य
प्रकाशित: (2022)

Cu-Ni alloys coatings for corrosion protection on mild steel in 0.5 M NaCl solution / Mohammad Hafizudden Mohd Zaki, Yusairie Mohd and Nik Norziehana Che Isa
द्वारा: Mohd Zaki, Mohammad Hafizudden, और अन्य
प्रकाशित: (2017)

Microbiologically-influenced corrosion of orthodontic alloys: a review of proposed mechanisms and effects
द्वारा: Papadopoulou Konstantina, और अन्य
प्रकाशित: (2023)

Characteristics of Surface Layer of Chromium Cobalt Alloy Coated with Titanium Nitride and Zirconium Nitride
द्वारा: P. Prachár, और अन्य
प्रकाशित: (2005)

Effect Of Surface Treatment on Shear Bond Strength of Acrylic Resin to Cobalt-Chromium Alloy
द्वारा: Mohammed M.Sadoon
प्रकाशित: (2014)

An In Vitro Study on the Shear Bond Strength of Feldspathic Porcelain to Nickel Chromium Alloy and Cobalt Chromium Alloy after Various Surface Treatments
द्वारा: Vignesh Kamath, और अन्य
प्रकाशित: (2022)

Formula instruction in English language writing: learnability, teachability and learner variables / Nor Ashikin Ab Manan
द्वारा: Ab Manan, Nor Ashikin
प्रकाशित: (2016)

Deformation and retentive forces variations of the additively manufactured cobalt-chromium and titanium alloys dental clasps
द्वारा: Kawkb M. El-Tamimi, और अन्य
प्रकाशित: (2024)

CR-COBALT ALLOYS AND TECHNOLOGICAL ASPECTS INVOLVED IN THE REALIZATION OF METAL INFRASTRUCTURE WITHIN SKELETAL PROSTHESES
द्वारा: Kamel Earar, और अन्य
प्रकाशित: (2023)

Evaluation of roughness and micromorphology of epoxy paint on cobalt-chromium alloy before and after thermal cycling
द्वारा: Alessandra Cardoso da Silva Nascimento, और अन्य
प्रकाशित: (2013)

Development of transmitter and receiver circuit for automatic announcement in LRT train / Mohd Nazrul Fazli Mohd Foudzi
द्वारा: Mohd Foudzi, Mohd Nazrul Fazli

The conceptual framework of Islamic work ethic (IWE) / Norlela Kamaluddin and Siti Khadijah Ab. Manan.
द्वारा: Kamaluddin, Norlela, और अन्य
प्रकाशित: (2010)

Evaluation of Chemical Stability of Coating Layer of Zirconium Nitride on the Basic Construction from Chromium-cobalt Alloy
द्वारा: S. Bartáková, और अन्य
प्रकाशित: (2007)

Fracture resistance of titanium, chrome-cobalt, and gold alloy as post and core materials: A comparative evaluation
द्वारा: Karunakaran Jeyaraman Venkataraman, और अन्य
प्रकाशित: (2020)