The effect of Nickel Oxide (NiO) compositions in consolidation of Silica-Nickel Oxide (SiO²-NiO) foams using replication method / P.S. Abdul Rahim ... [et al.]

Ceramic foams contribute to wide range of engineering application such as filter, thermal insulator, biomedical implant and catalytic reaction. There are many methods can be used found to be fabricating ceramic foams, however, replication method is the most effective method in producing ceramic foam...

Full description

Saved in:
Bibliographic Details
Main Authors: Abdul Rahim, P.S (Author), Shamsudin, M.S (Author), M., Rizamarhaiza (Author), Nazaruddin, N.A (Author)
Format: Book
Published: Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM), 2017.
Subjects:
Online Access:Link Metadata
Tags: Add Tag
No Tags, Be the first to tag this record!

MARC

LEADER 00000 am a22000003u 4500
001 repouitm_39315
042 |a dc 
100 1 0 |a Abdul Rahim, P.S  |e author 
700 1 0 |a Shamsudin, M.S.  |e author 
700 1 0 |a M., Rizamarhaiza  |e author 
700 1 0 |a Nazaruddin, N.A.  |e author 
245 0 0 |a The effect of Nickel Oxide (NiO) compositions in consolidation of Silica-Nickel Oxide (SiO²-NiO) foams using replication method / P.S. Abdul Rahim ... [et al.] 
260 |b Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM),   |c 2017. 
500 |a https://ir.uitm.edu.my/id/eprint/39315/1/39315.pdf 
520 |a Ceramic foams contribute to wide range of engineering application such as filter, thermal insulator, biomedical implant and catalytic reaction. There are many methods can be used found to be fabricating ceramic foams, however, replication method is the most effective method in producing ceramic foams. Fabrication of Silicon Dioxide (SiO2) foam with the addition of Nickel Oxide (NiO) by using replication method at different compositions was studied. The composition of SiO2 applied was at 55 wt. % while the compositions of NiO were 0, 5 and 7 wt. %. Polyethylene Glycol (PEG) and Carboxymethyl Cellulose (CMC) were used as binders while Polyurethane (PU) foam in cylindrical form was applied as space holder. Upon impregnation of the PU foams with SiO2-NiO slurries, drying process was performed at 100℃ for 24 hours. Then, the sample was further sintered at 600℃ for an hour and 1300℃ for two hours with heating rate at 2℃/min and natural cooling in the furnace. 
546 |a en 
690 |a Chemical elements 
690 |a Theory of solution 
690 |a TJ Mechanical engineering and machinery 
655 7 |a Article  |2 local 
655 7 |a PeerReviewed  |2 local 
787 0 |n https://ir.uitm.edu.my/id/eprint/39315/ 
856 4 1 |u https://ir.uitm.edu.my/id/eprint/39315/  |z Link Metadata