Hybrid vehicle engine misfire detection using Piezo-film Sensors and analysing with Z-freq / Nor Azazi Ngatiman and Mohd Zaki Nuawi
This paper explores the application of standard deviation and kurtosis to formulate a new statistical method for hybrid electric vehicle (HEV) engine misfire detection named as Z-freq. Existing engine management system is unable to evaluate the performance of each individual piston of the internal c...
Saved in:
Main Authors: | , |
---|---|
Format: | Book |
Published: |
Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM),
2018.
|
Subjects: | |
Online Access: | Link Metadata |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
MARC
LEADER | 00000 am a22000003u 4500 | ||
---|---|---|---|
001 | repouitm_41749 | ||
042 | |a dc | ||
100 | 1 | 0 | |a Ngatiman, Nor Azazi |e author |
700 | 1 | 0 | |a Nuawi, Mohd Zaki |e author |
245 | 0 | 0 | |a Hybrid vehicle engine misfire detection using Piezo-film Sensors and analysing with Z-freq / Nor Azazi Ngatiman and Mohd Zaki Nuawi |
260 | |b Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM), |c 2018. | ||
500 | |a https://ir.uitm.edu.my/id/eprint/41749/1/41749.pdf | ||
520 | |a This paper explores the application of standard deviation and kurtosis to formulate a new statistical method for hybrid electric vehicle (HEV) engine misfire detection named as Z-freq. Existing engine management system is unable to evaluate the performance of each individual piston of the internal combustion engine. Eventually, it will affect the whole hybrid system especially charging or cruising. The principal objective of this research is to diagnose the engine wall vibration and identify the combustion strokes. Furthermore, the primary advantages of this technique are the simple, accurate and fast computation of the algorithm such it can be processed rapidly using a low-cost controller. This investigation involves two phases of the procedure including signal measurement using data acquisition equipment as well as signal analysis using the MatLab. At the first phase, a piezoelectric-based sensor called piezo-film is attached to each engine wall, run the hybrid engine at different speeds and also run with misfire spark plug and record the signal measured. While the second phase is signal measurement using data acquisition, filtering and analysis using Z-freq method. The advantage of the proposed method isthis technique able to identify different combustion strokes. This technique is also can be applied for engine technical expert who requires simple, fast yet accurate results. These findings provide a solid evidence base on pattern representation which easier to the investigator to categorise the measured parameters. | ||
546 | |a en | ||
690 | |a TL Motor vehicles. Aeronautics. Astronautics | ||
690 | |a Motor vehicles. Cycles | ||
655 | 7 | |a Article |2 local | |
655 | 7 | |a PeerReviewed |2 local | |
787 | 0 | |n https://ir.uitm.edu.my/id/eprint/41749/ | |
856 | 4 | 1 | |u https://ir.uitm.edu.my/id/eprint/41749/ |z Link Metadata |