Comparison on polymerization of bulk-fill composite resins in different marginal thickness of tunnel restoration / SM Ab Ghani ... [et al.]

• Main Authors: Ab Ghani, SM (Author), Hassan, N S (Author), Tamrin, A A (Author), Lim, T W (Author), Abu Hassan, M I (Author), Ismail, M H (Author)
• Format: Book
• Published: Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM), 2018.
• Subjects: Article; PeerReviewed
• Online Access: Link Metadata

Summary

Bulk-fill composite resins (BCR) was introduced with the advantage of 4-5mm depth of cured, thus an applicable material for a tunnel restoration. The study aimed to assess the polymerization of BCR with different marginal ridge thickness in tunnel restoration technique. Fifteen extracted teeth categorized into; G1=conventional proximal restoration (n:5), G2=tunnel 1.5mm marginal ridge thickness (n:5) and G3=tunnel 3.0mm marginal ridge thickness (n:5). Samples received the designated cavity preparation design and restored with BCR, embedded in resin and sectioned into halves. Each sample was tested with Vickers micro-hardness at the top (TP), middle (MP) and bottom part (BP) to get the micro-hardness value (VH). Data were statistically analyzed with 1-way ANOVA to compare means between groups and repeated measured ANOVA to compare means between the different areas. The mean micro-hardness (VH) value for top part (TP) G1=79.1, G2=77.3 and G3=74.9.; middle part (MP) G1=79.0, G2=73.3 and G3=74.9 and bottom part (BP) G1=71.1, G2=64.4 and G3=62.7. A decrease pattern of VH noted TP>MP>BP. No significant difference (p>0.05) VH for all groups for TP. For MP, significant difference (p<0.05) noted among the 3 groups and for BP, significant differences (p<0.05) between G1 to G2 and G3 only. In the same group, no statistical mean differences (p>0.05) were

Item Description

https://ir.uitm.edu.my/id/eprint/41966/1/41966.pdf