A comparison of the marginal and internal fit of CAD/CAM fabricated metal alloy fixed partial dentures/ Mohd Faiz Nasruddin ... [et al.]
Fitting accuracy of dental prostheses is essential for clinical success. An ideal marginal and internal fit will minimize plaque accumulation, gingival irritation, cement dissolution and micro leakage as well as enhancing the mechanical behaviour of a fixed partial denture (FPD) (1). Unfortunately,...
Saved in:
Main Authors: | , , , |
---|---|
Format: | Book |
Published: |
Faculty of Dentistry,
2016.
|
Subjects: | |
Online Access: | Link Metadata |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
MARC
LEADER | 00000 am a22000003u 4500 | ||
---|---|---|---|
001 | repouitm_48942 | ||
042 | |a dc | ||
100 | 1 | 0 | |a Nasruddin, Mohd Faiz |e author |
700 | 1 | 0 | |a Theocharospoulos, Antonios |e author |
700 | 1 | 0 | |a Ray, Noel |e author |
700 | 1 | 0 | |a Burke, Francis M |e author |
245 | 0 | 0 | |a A comparison of the marginal and internal fit of CAD/CAM fabricated metal alloy fixed partial dentures/ Mohd Faiz Nasruddin ... [et al.] |
260 | |b Faculty of Dentistry, |c 2016. | ||
500 | |a https://ir.uitm.edu.my/id/eprint/48942/1/48942.pdf | ||
520 | |a Fitting accuracy of dental prostheses is essential for clinical success. An ideal marginal and internal fit will minimize plaque accumulation, gingival irritation, cement dissolution and micro leakage as well as enhancing the mechanical behaviour of a fixed partial denture (FPD) (1). Unfortunately, there is disagreement about acceptable marginal and internal fit discrepancies of FPD's (2) from 75-200μm. The range of discrepancies stated (75-200µm) does not jeopardize the clinical performance of the restoration. However, McLean and von Fraunhofer (3) reported that marginal gaps of less than 120μm are clinically acceptable while gaps of less than 80μm are difficult to detect clinically. | ||
546 | |a en | ||
690 | |a Oral and dental medicine. Pathology. Diseases | ||
690 | |a Engineering design | ||
690 | |a Computer-aided design. CAD/CAM systems | ||
655 | 7 | |a Article |2 local | |
655 | 7 | |a PeerReviewed |2 local | |
787 | 0 | |n https://ir.uitm.edu.my/id/eprint/48942/ | |
787 | 0 | |n http://myjms.mohe.gov.my/index.php/corals/index | |
856 | 4 | 1 | |u https://ir.uitm.edu.my/id/eprint/48942/ |z Link Metadata |