Ata uhi

Properties of laminated veneer lumber from oil palm trunk veneer using different adhesives / Muhammad Najib Yusoff, Siti Noorbaini Sarmin and Ahmad Sardey Idris

This study was undertaken is to determine the properties of laminated veneer lumber from oil palm trunk by using different adhesive and spread level. Experimental LVL panel from OPT veneers bonded with Polyvinyl acetate (PVAc) and Phenol Formaldehyde (PF) were produced with two adhesive spread level...

Whakaahuatanga katoa

I tiakina i:

Ngā taipitopito rārangi puna kōrero
Ngā kaituhi matua:	Yusoff, Muhammad Najib (Author), Sarmin, Siti Noorbaini (Author), Idris, Ahmad Sardey (Author)
Hōputu:	Pukapuka
I whakaputaina:	2011-05.
Ngā marau:	Conference or Workshop Item PeerReviewed
Urunga tuihono:	Link Metadata
Ngā Tūtohu:	Tāpirihia he Tūtohu Kāore He Tūtohu, Me noho koe te mea tuatahi ki te tūtohu i tēnei pūkete!

Ngā tūemi rite

Dimensional stability properties of laminated veneer lumber made from oilpalm trunk bonded with different cold set adhesives / Siti Noorbaini Sarmin, Othman Sulaiman and Rokiah Hashim
mā: Sarmin, Siti Noorbaini, me ētahi atu.
I whakaputaina: (2011)

Study on the effect of different adhesives on properties of hybrid plywood from coconut and rubberwood / Mohammad Fahamy Ismail, Siti Noorbaini Sarmin and Ahmad Sardey Idris
mā: Ismail, Mohammad Fahamy, me ētahi atu.
I whakaputaina: (2011)

Effects of different resin content and particle sizes on properties of threelayered particleboard using oil palm frond / Siti Noorbaini Sarmin, Jamaludin Kassim and Ahmad Sardey Idris
mā: Sarmin, Siti Noorbaini, me ētahi atu.
I whakaputaina: (2011)

Improved properties of Oil Palm Trunk (OPT) Laminated Veneer Lumber (LVL) through the inclusion of rubberwood veneers / Kamarulzaman Nordin ... [et al.]
mā: Nordin, Kamarulzaman, me ētahi atu.
I whakaputaina: (2004)

Mechanical and physical properties of gypsum-paper sludge board / Norazleen Othman and Siti Noorbaini Sarmin
mā: Othman, Norazleen, me ētahi atu.
I whakaputaina: (2011)

New environmentally lightweight building materials from hybrid inorganic polymer-wood particles / Siti Noorbaini Sarmin
mā: Siti Noorbaini, Sarmin
I whakaputaina: (2015)

The prospect of oil palm trunk for manufacturing laminated veneer lumber (LVL) / Ahmad Fauzi Puasa and Hashim W Samsi
mā: Puasa, Ahmad Fauzi, me ētahi atu.
I whakaputaina: (2008)

Tensile strength behavior of laminated veneer lumber / Zakiah Ahmad ... [et al.]
mā: Ahmad, Zakiah, me ētahi atu.
I whakaputaina: (2002)

Students satisfaction in using UiTM MOOC platform for e-learning / Siti Noorbaini Sarmin ...[et al.]
mā: Sarmin, Siti Noorbaini, me ētahi atu.
I whakaputaina: (2021)

Students satisfaction in using UiTM MOOC platform for e-Learning / Siti Noorbaini Sarmin ... [et al.]
mā: Sarmin, Siti Noorbaini, me ētahi atu.
I whakaputaina: (2021)

Physical and mechanical properties of three layer particleboard from oil palm frond / Norfazlina Zainal, Siti Noorbaini Sarmin and Jamaludin Kasim
mā: Zainal, Norfazlina, me ētahi atu.
I whakaputaina: (2011)

Evaluation on the physical and mechanical properties of particleboard from batai (Paraserianthes falcataria) / Noor Rehan Ismail, Siti Noorbaini Sarmin and Jamaludin Kasim
mā: Ismail, Noor Rehan, me ētahi atu.
I whakaputaina: (2011)

Laminated Veneers with Stratified Feldspathic Ceramics
mā: Henrique Tuzzolo Neto, me ētahi atu.
I whakaputaina: (2018)

Factors that affect the success of laminate veneer restorations
mā: Beyza Betül ŞENCAN, me ētahi atu.
I whakaputaina: (2023)

LAMINATE VENEER - CAD / CAM: CASE REPORTS
mā: Evrem Gülnahar, me ētahi atu.
I whakaputaina: (2014)

Porcelain laminate veneers: Clinical survey for evaluation of failure
mā: Diemah F. Alhekeir, me ētahi atu.
I whakaputaina: (2014)

Direct Composite Laminate Veneers: Three Case Reports
mā: Bora Korkut, me ētahi atu.
I whakaputaina: (2013)

Esthetic Rehabilitation of Anterior Teeth with Laminates Composite Veneers
mā: Dino Re, me ētahi atu.
I whakaputaina: (2014)

The effect of polymerization and preparation techniques on the microleakage of composite laminate veneers
mā: Neslihan Celik, me ētahi atu.
I whakaputaina: (2017)

Another survey on etched porcelain laminate veneers in aesthetic dentistry
mā: F Farshchian
I whakaputaina: (1989)

Esthetic Rehabilitation of the Smile with No-Prep Porcelain Laminates and Partial Veneers
mā: Arcelino Farias-Neto, me ētahi atu.
I whakaputaina: (2015)

Evaluation of Laminate Veneer Preparation Depth with 3D Systems
mā: Orhan Öztoprak, me ētahi atu.
I whakaputaina: (2020)

Midline Diastema Closure with Partial Laminate Veneers: A Case Report
mā: Akan Ender, me ētahi atu.
I whakaputaina: (2016)

Marginal adaptation of Spinell InCeram and feldspathic porcelain laminate veneers
mā: Tahereh Ghaffari, me ētahi atu.
I whakaputaina: (2016)

Ceramic Laminate Veneers for Reestablishment of Esthetics in Case of Lateral Incisor Agenesis
mā: Geórgia Silva, me ētahi atu.
I whakaputaina: (2018)

A Step-by-Step Conservative Approach for CAD-CAM Laminate Veneers
mā: Gerardo Durán Ojeda, me ētahi atu.
I whakaputaina: (2017)

Role of adhesive systems on the luting interface's thickness of ceramic laminate veneers
mā: Henrico Badaoui STRAZZI-SAHYON, me ētahi atu.
I whakaputaina: (2020)

Influence of Ceramic and Substrate Types on the Microleakage of Aged Porcelain Laminate Veneers
mā: Alnakib Y, me ētahi atu.
I whakaputaina: (2021)

Properties of hybrid plywood from coconut and rubberwood veneer using different spread level adhesives / Mohd Khairul Nizam Tapak ...[et al.]
mā: Tapak, Mohd Khairul Nizam, me ētahi atu.
I whakaputaina: (2011)

Minimally Invasive Laminate Veneers: Clinical Aspects in Treatment Planning and Cementation Procedures
mā: R. K. Morita, me ētahi atu.
I whakaputaina: (2016)

Digital smile design as a tool in the planning of porcelain laminate veneers restoration
mā: Sávio Morato de Lacerda GONTIJO, me ētahi atu.
I whakaputaina: (2021)

Thickness and yttria percentage influences the fracture resistance of laminate veneer zirconia restorations
mā: Ali Dhahee Malallah, me ētahi atu.
I whakaputaina: (2022)

Examination of the Shear Force Resistance of Laminate Veneers Adhered with Different Resin Cements
mā: Emel Arslan, me ētahi atu.
I whakaputaina: (2022)

Effect of ceramic translucency and luting cement shade on the color masking ability of laminate veneers
mā: Bassem S. M. Kandil, me ētahi atu.
I whakaputaina: (2019)

Esthetic Crown Lengthening and Minimally Invasive Laminate Veneers to Resolve Altered Passive Eruption
mā: Cimara Fortes Ferreira, me ētahi atu.
I whakaputaina: (2024)

Marginal Fit of Porcelain Laminate Veneer Materials under Thermocycling Condition: An In-Vitro Study
mā: Zanbaq Azeez Hanoon, me ētahi atu.
I whakaputaina: (2023)

Cervical and incisal marginal discrepancy in ceramic laminate veneering materials: A SEM analysis
mā: Hemalatha Ranganathan, me ētahi atu.
I whakaputaina: (2017)

Correction of Vertical Smile Discrepancy through Ceramic Laminate Veneers and Surgical Crown Lengthening
mā: Paula Bernardon, me ētahi atu.
I whakaputaina: (2019)

Fracture resistance of CAD/CAM milled versus direct hand-made interim laminate veneers
mā: Salahaldeen Abuhammoud, me ētahi atu.
I whakaputaina: (2024)

Ceramic laminate veneers luted with preheated resin composite: A 10-year clinical report
mā: Rogério L Marcondes, me ētahi atu.
I whakaputaina: (2021)