Beeld op de omslag

Structural performance of Ti6Al4V tibial tray in Total Knee Arthroplasty (TKA) by functionally graded lattice structures using numerical analysis / Nurasyrani Rabuan ... [et al.]

The medical industry benefits greatly from the additive manufacturing (AM) technology used on customized products. Total knee arthroplasty (TKA) has been widely used however it has drawbacks of stress shielding and loosening due to the excessive daily routine of patients. The problem could be minimi...

Volledige beschrijving

Bewaard in:

Bibliografische gegevens
Hoofdauteurs:	Rabuan, Nurasyrani (Auteur), Adenan, Mohd Shahriman (Auteur), HP Manurung, Yupiter (Auteur), Mohd Anuar, Mohd Afzan (Auteur), Shuib, Solehuddin (Auteur)
Formaat:	Boek
Gepubliceerd in:	Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM), 2023-11.
Onderwerpen:	Article PeerReviewed
Online toegang:	Link Metadata
Tags:	Voeg label toe Geen labels, Wees de eerste die dit record labelt!

Gelijkaardige items

Residual stress measurements on SS316L specimen using selective laser melting and numerical computation software / Micheal Stoschka ... [et al.]
door: Stoschka, Micheal, et al.
Gepubliceerd in: (2023)

Analytical prediction of fatigue resistance of additively manufactured aluminium alloy based on Murakami method / Matthias Oberreiter ... [et al.]
door: Oberreiter, Matthias, et al.
Gepubliceerd in: (2023)

Evaluation of tabular leg structure of mobile offshore production unit (MOPU) life extension using condition assessment method / Emi Hafizzul Jamaluddin ... [et al.]
door: Jamaluddin, Emi Hafizzul, et al.
Gepubliceerd in: (2021)

Analysis of Weld Induced Distortion of Butt Joint using Simulation and Experimental Study / Mohd Shahar Sulaiman ...[et al.]
door: Sulaiman*, Mohd Shahar, et al.
Gepubliceerd in: (2018)

Surface topography and biocompatibility of Ti-6Al-4V after Wire Electro-Discharge Machining (WEDM) / Nornisaadila Musa ...[et al.]
door: Musa, Nornisaadila, et al.
Gepubliceerd in: (2019)

Femoral head structural allograft for severe bone defects in revision TKA
door: Churl Hong Chun, et al.
Gepubliceerd in: (2017)

Effect of friction stir welding parameters on fatigue resistance, weld quality and mechanical properties of Al 6061-T651 / Mohamed Ackiel Mohamed and Yupiter HP Manurung
door: Mohamed, Mohamed Ackiel, et al.
Gepubliceerd in: (2017)

Experimental analysis on grain growth kinetics of SS316l austenitic stainless steel / Muhd Faiz Mat ... [et al.]
door: Mat, Muhd Faiz, et al.
Gepubliceerd in: (2021)

Drying kinetics of mango fruit using tray and oven dryer / Norhasmanina Norhadi ... [et al.]
door: Norhadi, Norhasmanina, et al.
Gepubliceerd in: (2020)

Virtual manufacturing for prediction of Martensite Formation and Hardness Value induced by Laser Welding Process using Subroutine Algorithm in MSC Marc/Mentat / Omar Yahya...[et al.]
door: Yahya,, Omar, et al.
Gepubliceerd in: (2018)

Improvement of mechanical properties in treated spot welded joint / Farizah Adliza Ghazali ... [et al.]
door: Ghazali, Farizah Adliza, et al.
Gepubliceerd in: (2018)

Representing lattices by lattices of subgroupoids
door: Mullika Tawonatiwas
Gepubliceerd in: (2014)

Design for additive manufacturing and finite element analysis for high flexion total knee replacement (TKR) / Solehuddin Shuib ...[et al.]
door: Shuib, Solehuddin, et al.
Gepubliceerd in: (2021)

Methodical procedure of virtual manufacturing for analysing WAAM distortion along with experimental verification / Keval Priapratama Prajadhiana ... [et al.]
door: Prajadhiana, Keval Priaratama, et al.
Gepubliceerd in: (2021)

Tawarruq as an alternative to Ar-Rahnu structure / Mohd Shafiz Saharan ... [et al.]
door: Saharan, Mohd Shafiz, et al.
Gepubliceerd in: (2021)

Comparative Distortion Analysis of Welded T-Joint between 2D-Shell and 3D-Solid Element using FEA with Experimental Verification / Keval. P Prajadhiana...[et al.]
door: P Prajadhiana, Keval, et al.
Gepubliceerd in: (2018)

Computation of temperature distributions on uniform and non-uniform lattice sizes using mesoscopic lattice boltzmann method / D. Arumuga Perumal ... [et al.]
door: D. Arumuga Perumal
Gepubliceerd in: (2014)

Understanding forest degradation - a review of forest structure indicators / Alexius Korom ... [et al.]
door: Korom, Alexius, et al.
Gepubliceerd in: (2022)

Penambahbaikan kaedah peramalan purata setempat bagi peramalan data siri masa aras sungai di kawasan banjir / Adib Mashuri ... [et al.]
door: Mashuri, Adib, et al.
Gepubliceerd in: (2021)

Strategy and structure of the hotel industry in Malaysia / Salleh Mohd Radzi ... [et al.]
door: Mohd Radzi, Salleh, et al.
Gepubliceerd in: (2007)

A review of the milling process to fabricate a dimple structure / Sharudin Hassan...[et al.]
door: Hassan, Sharudin, et al.
Gepubliceerd in: (2017)

Modelling public perception of Rohingya refugees using Structural Equation Modelling (PLS) in Malaysia / Mohd Ramlan Mohd Arshad ... [et al.]
door: Mohd Ramlan, Mohd Arshad, et al.
Gepubliceerd in: (2021)

Ethical values and competitiveness within concentrated ownership structure in Malaysia / Mohd Farhan Mohd Dah ... [et al.]
door: Mohd Dah, Mohd Farhan, et al.
Gepubliceerd in: (2016)

IMPLEMENTASI PENDIDIKAN KARAKTER PADA ANAK USIA DINI : Studi Kasus di TKA Al-Mukhlisin Cibodas Lembang
door: Ma'mun, Nawawi
Gepubliceerd in: (2012)

Assessment of fraud risk performance: interaction effects of brainstorming and task structure of government auditors / Mohd Daniel Mohd Nassir ... [et al.]
door: Mohd Nassir, Mohd Daniel, et al.
Gepubliceerd in: (2016)

Structure Fabricated using Entry Level 3D Printer / Siti Nur Humaira Mazlan ...[et al.]
door: Mazlan, Siti Nur Humaira, et al.
Gepubliceerd in: (2018)

Earnings management behavior in Malaysia: the role of ownership structure and external auditing / Nor Irdawati Mahyuddin ... [et al.]
door: Mahyuddin, Nor Irdawati, et al.
Gepubliceerd in: (2020)

Fatigue Life Assessment of 9mm Thickness Low Carbon Steel with Multi-Objective Optimized Welding Process / Azrriq Zainul Abidin...[et al.]
door: Abidin, Azrriq Zainul, et al.
Gepubliceerd in: (2017)

Efficacy of auxetic lattice structured shoe sole in advancing footwear comfort-From the perspective of plantar pressure and contact area
door: Jifa Zhang, et al.
Gepubliceerd in: (2024)

Epoxy-UHMWPE acetabular cup performance based on finite element study / Solehuddin Shuib ... [et al.]
door: Shuib, Solehuddin, et al.
Gepubliceerd in: (2018)

Performance of hollow reinforced concrete beam in structural member / Hamidun Mohd Noh...[et al.]
door: Mohd Noh, Hamidun, et al.
Gepubliceerd in: (2020)

On Length Spectra of Lattices
door: Willging, Thomas
Gepubliceerd in: (2010)

Non-Linear Lattice
Gepubliceerd in: (2016)

Quarks, Gluons and Lattices
door: Creutz, Michael
Gepubliceerd in: (1983)

Quarks, Gluons and Lattices
door: Creutz, Michael
Gepubliceerd in: (1983)

The impact of financial structure towards performance of non-financial companies listed on amman stock exchange / Laith Fouad Alshouha ... [et al.]
door: Alshouha, Laith Fouad, et al.
Gepubliceerd in: (2021)

The design of reusable endosurgical grasper using compliant mechanism / Solehuddin Shuib...[et al.]
door: Shuib*,, Solehuddin, et al.
Gepubliceerd in: (2019)

Analysing population structure of Elaeis Oleifera germplasm using model-based approach programme STRUCTURE / Wan Nurhayati Wan Hanafi ...[et al.]
door: Wan Hanafi, Wan Nurhayati, et al.
Gepubliceerd in: (2017)

Amorphous phase of SnO₂ doped Al₂O₃ thin film: optical and structural properties / Puteri Sarah Mohamad Saad ... [et al.]
door: Mohamad Saad, Puteri Sarah, et al.
Gepubliceerd in: (2021)

FEM-based virtual manufacturing for deformation analysis of coupled welding-forming process / Keval Priapratama Prajadhiana ... [et al.]
door: Prajadhiana, Keval Priapratama, et al.
Gepubliceerd in: (2019)