STUDI KELAIKAN PEMANFAATAN PLASTIK TYPE 5 DAN TIPE 6 SEBAGAI MATERIAL LAMBUNG KAPAL

• Main Author: Asrun Sobirin Nasution, (Author)
• Format: Book
• Published: 2021-02-08.
• Subjects: Thesis; NonPeerReviewed
• Online Access: Link Metadata
• Notes: http://repository.upnvj.ac.id/9101/1/ABSTRAK.pdf; http://repository.upnvj.ac.id/9101/25/AWAL.pdf; http://repository.upnvj.ac.id/9101/3/BAB%201.pdf; http://repository.upnvj.ac.id/9101/4/BAB%202.pdf; http://repository.upnvj.ac.id/9101/5/BAB%203.pdf; http://repository.upnvj.ac.id/9101/6/BAB%204.pdf; http://repository.upnvj.ac.id/9101/26/BAB%205.pdf; http://repository.upnvj.ac.id/9101/27/DAFTAR%20PUSTAKA.pdf; http://repository.upnvj.ac.id/9101/9/RIWAYAT%20HIDUP.pdf; http://repository.upnvj.ac.id/9101/10/LAMPIRAN.pdf; http://repository.upnvj.ac.id/9101/11/ARTIKEL%20KI.pdf
• Keywords: TA Engineering (General). Civil engineering (General)

Plastic waste is a problem that has emerged in the world, the government has made many efforts to reduce the amount of plastic waste, such as reducing the use of single-use plastics in everyday life. Type 5 and type 6 plastic waste is quite widely used, especially for food and beverage packaging. To reduce the amount of plastic waste type 5 and type 6, a composite material was made using the Hand lay-up method for alternative shipbuilding materials. Tensile and bending testers were also carried out for the composite materials used. The manufacture of this composite material uses Yukalac 157 resin as a binder polymer from plastic filaments, so that it will add strength to the plastic composite. Based on the test results, it was found that the tensile strength of type 5 plastic composites got the greatest stress value, namely 3.62 Mpa with the 3rd arrangement composition while for type 6 got the greatest stress value, namely 12.17 Mpa with the 3rd arrangement composition. The tensile strength also obtained the strength value of type 5 plastic composites, the greatest bending stress value was 11.47 Mpa with the 3rd arrangement composition, while for type 6 the greatest stress value was 24.93 Mpa with the 3rd arrangement composition. In this study, the tensile and flexural strength of the platinum composite types 5 and 6 have not exceeded the tensile and flexural strength of fiberglass of 100 Mpa for the tensile test and 150 Mpa for the bending test.