Physicochemical properties of Ethiopian Beeswax, the case of South Wollo zone, Amhara Region

<p>The study was conducted in three purposively selected districts of South Wollo Zone, Tehulederie, Kalu and Dessie Zuria, intended to analyze the physicochemical properties of beeswax produced in 2015/6. Twenty-six beeswax samples were collected being sourced from honey extract, 'Tej se...

Description complète

Enregistré dans:
Détails bibliographiques
Auteurs principaux: Addisu Bihonegn (Auteur), Desalegn Begna (Auteur), Asaminew Tassew (Auteur), Zeleke Mekuriaw (Auteur)
Format: Livre
Publié: International Journal of Agricultural Science and Food Technology - Peertechz Publications, 2017-09-15.
Sujets:
Accès en ligne:Connect to this object online.
Tags: Ajouter un tag
Pas de tags, Soyez le premier à ajouter un tag!

MARC

LEADER 00000 am a22000003u 4500
001 peertech__10_17352_2455-815X_000024
042 |a dc 
100 1 0 |a Addisu Bihonegn  |e author 
700 1 0 |a  Desalegn Begna  |e author 
700 1 0 |a  Asaminew Tassew  |e author 
700 1 0 |a Zeleke Mekuriaw  |e author 
245 0 0 |a Physicochemical properties of Ethiopian Beeswax, the case of South Wollo zone, Amhara Region 
260 |b International Journal of Agricultural Science and Food Technology - Peertechz Publications,   |c 2017-09-15. 
520 |a <p>The study was conducted in three purposively selected districts of South Wollo Zone, Tehulederie, Kalu and Dessie Zuria, intended to analyze the physicochemical properties of beeswax produced in 2015/6. Twenty-six beeswax samples were collected being sourced from honey extract, 'Tej sefef', old combs and purchased beeswax blocks and analyzed at Sekota Dry land Agricultural Research Center laboratory according to the standard protocols of Ethiopian Beeswax specification ET-1203-2005 developed by Quality Standard Authority of Ethiopia in 2005. The laboratory result showed that the compositional content of beeswax collected from the study areas falls within the range of good quality parameters set for national and world standards. Except for ash content, there is no significant compositional content variation (P>0.05) between the sampled districts. However, there is significant variation (P<0.05) between beeswax samples based on the source from which they were obtained. The mean values are specific gravity (0.9552±0.0034), melting point (61.5628±1.50080 C), refractive index (1.4439±0.0004), ash content (0.0345±0.0429%), total volatile matter (0.5491±0.2488%), acid value (18.9155±2.7735), saponification value (91.1901±22.3015), ester value (72.0619±20.2859), and ester to acid ratio (3.7211±0.8569). However, melting point, saponification value, ester value and ester to acid ratio values of purchased beeswax samples and beeswax samples from old combs of absconded colonies showed lower result than the national and international limit. In general, this study identified physicochemical properties of the beeswax in the study areas and contributed to the information on beeswax quality of Ethiopia suggesting legal intervention on controlling purchasing of beeswax in bulk.</p> 
540 |a Copyright © Addisu Bihonegn et al. 
546 |a en 
655 7 |a Research Article  |2 local 
856 4 1 |u https://doi.org/10.17352/2455-815X.000024  |z Connect to this object online.