Íomhá chlúdaigh

Study on stability of a novel binder system based on palm stearin in metal injection moulding application / Muhammad Hussain Ismail ... [et al.]

Metal Injection Molding (MIM) is a wellestablished technology for manufacturing a variety of complex and small precision parts. In this paper, fundamental rheological characteristics of MIM feedstock using palm stearin are theoretically analyzed and presented. The feedstock consisted of gas atomized...

Cur síos iomlán

Sábháilte in:

Sonraí bibleagrafaíochta
Príomhchruthaitheoirí:	Ismail, Muhammad Hussain (Údar), Muhamad, Norhamidi (Údar), Jumahat, Aidah (Údar), Subuki, Istikamah (Údar), Omar, Mohd Afian (Údar)
Formáid:	LEABHAR
Foilsithe / Cruthaithe:	Institute of Research, Development and Commercialisation (IRDC), 2007.
Ábhair:	Article PeerReviewed
Rochtain ar líne:	Link Metadata
Clibeanna:	Cuir clib leis Níl clibeanna ann, Bí ar an gcéad duine le clib a chur leis an taifead seo!

Míreanna comhchosúla

Characteristic Of The YTTRIA Stabilized Zirconia (YSZ) for Ceramic Injection Moulding by Using Palm Stearin as a Primary Binder / Mahfuzah Zainudin and Muhammad Hussain Ismail
de réir: Zainudin, Mahfuzah, et al.
Foilsithe / Cruthaithe: (2017)

Parameter Optimization of Sintering Ti-6Al-7Nb Powder and Palm Stearin Binder System for the Highest Sintered Density using the Taguchi Method / Rozie Nani Ahmad...[et al.]
de réir: Ahmad, Rozie Nani, et al.
Foilsithe / Cruthaithe: (2017)

Rheological Properties Of Titanium Alloy (Ti6Al4V) - Wollastonite (W) Composite Using Palm Stearin as Based Binder / Mohd Ikram Ramli...[et al.]
de réir: Ramli, Mohd Ikram, et al.
Foilsithe / Cruthaithe: (2017)

Effect of heat treatment on phase transformation of niti shape memory alloy produced by metal injection moulding / Ros Atikah Abdul Kadir, NurAtira Sharir and Muhammad Hussain Ismail
de réir: Abdul Kadir, Ros Atikah, et al.
Foilsithe / Cruthaithe: (2021)

Sintered strength of ti-6Al-4V by metal injection molding (MIM) using palm stearin binder / N. H. Mohamad Nor...[et al.]
de réir: N. H., Mohamad Nor, et al.
Foilsithe / Cruthaithe: (2019)

From research & innovation ideas into product patent / Muhammad Hussain Ismail
de réir: Ismail, Muhammad Hussain
Foilsithe / Cruthaithe: (2023)

Rheological properties of titanium niobium based feedstocks for metal injection moulding / Rozie Nani Ahmad...[et al.]
de réir: Ahmad, Rozie Nani, et al.
Foilsithe / Cruthaithe: (2017)

Simulation of surface crack interaction of marine solid shaft / Noor Elya Nashiewa Shabarudin and Muhammad Hussain Ismail
de réir: Shabarudin, Noor Elya Nashiewa, et al.
Foilsithe / Cruthaithe: (2023)

Effect of compaction pressure on densification of alumina sintered components / Muhammad Hussain Ismail ... [et al.]
Foilsithe / Cruthaithe: (2007)

Effect of sintering temperatures on microstructural changes and phase transformation of nearly equiatomic microporous NiTi Alloy produced by metal injection moulding / Mashitah Maso'od ... [et al.]
de réir: Maso'od, Mashitah, et al.
Foilsithe / Cruthaithe: (2018)

The Characterization and Rheological Investigation of Materials for Powder Injection Moulding / Ukwueze Bonaventure Emeka...[et al.]
de réir: Ukwueze, Bonaventure Emeka, et al.
Foilsithe / Cruthaithe: (2017)

Influence of Waste Plastic Binder on Sintered Properties of Injection Moulded M2 HSS / Rosniza Rabilah...[et al.]
de réir: Rabilah, Rosniza, et al.
Foilsithe / Cruthaithe: (2017)

Parameter optimization of metal injection moulding : A review / M Prathabrao ... [et al.]
de réir: Prathabrao, M, et al.
Foilsithe / Cruthaithe: (2018)

Metal-Based G-Quadruplex Binders for Cancer Theranostics
de réir: Elisa Palma, et al.
Foilsithe / Cruthaithe: (2021)

RISE: IWK-UiTM research collaboration / Assoc. Prof. Dr Aidah Jumahat
de réir: Jumahat, Aidah
Foilsithe / Cruthaithe: (2021)

Public art : the enrichment of Genius Loci / Muhammad Falihin Jasmi, Nur Huzeima Mohd Hussain and Siti Syamimi Omar
de réir: Muhammad Falihin, Jasmi, et al.
Foilsithe / Cruthaithe: (2018)

Performance of Polycaprolactone/Hydroxyapatite (PCL/HA) Composite Blended by Ultrasound Assisted Melt Blending / Suffiyana Akhbar ... [et al.]
de réir: Akhbar, Suffiyana, et al.
Foilsithe / Cruthaithe: (2018)

The Moulding of Ukraine
de réir: Kataryna Wolczuk
Foilsithe / Cruthaithe: (2001)

Delivering information literacy skills in resource-based assignments through virtual school library/ Halida Yu, Saidatul Akmar Hj Ismail and Hussain Hashim
de réir: Yu, Halida, et al.
Foilsithe / Cruthaithe: (2015)

Influence of thermoplastic zein in PCL/TZ and HAp bio composite via solid state supercritical CO₂ foaming / Istikamah Subuki, Suffiyana Akhbar and Farrah Khalidah Nor Wahid
de réir: Subuki, Istikamah, et al.
Foilsithe / Cruthaithe: (2020)

PENGARUH METODE SALURAN PENDINGIN PADA MOULD CONFORMAL LAMINASI, MOULD LURUS DAN MOULD CONFORMAL SOFT TOOLING TERHADAP CACAT PRODUK WARPAGE, SINK MARK DAN PENGUKURAN KESELINDRISAN PRODUK PADA MESIN MANUAL INJECTION MOULDING PLASTIC
de réir: SUSANTO, SUSANTO
Foilsithe / Cruthaithe: (2011)

Green roof concept analysis: a comparative study of urban farming practice in cities / Nur Hayati Hashim, Nur Huzeima Mohd Hussain and Asmat Ismail
de réir: Hashim, Nur Hayati, et al.
Foilsithe / Cruthaithe: (2020)

The performance of porous asphalt by using modified binder / Muhammad Mohktar Samat, Meor Othman Hamzah and Norizah Omar
de réir: Samat, Muhammad Mohktar, et al.
Foilsithe / Cruthaithe: (2008)

A preliminary study on sustainable approach for the Malay traditional food wrapping / Muhammad Nor Razin Mhd Nor, Shahrel Nizar Baharom and Nur Huzeima Mohd Hussain
de réir: Mhd Nor, Muhammad Nor Razin, et al.
Foilsithe / Cruthaithe: (2021)

How to attract users come to the library / Muhammad Faris Mohammad Damanhuri and Muhammad Firdaus Ismail
de réir: Mohammad Damanhuri, Muhammad Faris, et al.
Foilsithe / Cruthaithe: (2015)

Implementation of particle swarm optimization for tuning of PID controller in Arduino Nano for solar MPPT system / Muhammad Iqbal Mohd Zakki, Mohd Najib Mohd Hussain and Nawawi Seroji
de réir: Mohd Zakki, Muhammad Iqbal, et al.
Foilsithe / Cruthaithe: (2018)

Privileged wills and the application for probate in Malaysia: a legal study / Faridah Hussain
de réir: Hussain, Faridah
Foilsithe / Cruthaithe: (2020)

Investigation of Plasma Treatment on Micro-Injection Moulded Microneedle for Drug Delivery
de réir: Karthik Nair, et al.
Foilsithe / Cruthaithe: (2015)

Failure analysis of fiber reinforced composite materials used in Malaysian industries / Jamaluddin Mahmud, Wahyu Kuntjoro and Aidah Jumahat
de réir: Mahmud, Jamaluddin, et al.
Foilsithe / Cruthaithe: (2007)

Plaster Mould Selection for Ceramic Slip Rotary Moulding System (CSRM) / Norrul Hafizan Ab Wahab ...[et al.]
de réir: Ab Wahab, Norrul Hafizan, et al.
Foilsithe / Cruthaithe: (2017)

Sintering and dimensional analysis of Cu/CNTs via a powder metallurgy route / Nor Shamimi Shaari...[et al.]
de réir: Shaari, Nor Shamimi, et al.

Soap-Bubbles and the Forces Which Mould Them
de réir: Boys, C. V. (Charles Vernon), 1855-1944

A Comparative Study of Mould Base Tool Materials in Plastic Injection Moulding to Improve Cycle Time and Warpage Using Statistical Method / A.A. Raus ...[et al.]
de réir: A. Raus, A., et al.
Foilsithe / Cruthaithe: (2017)

Advances in Binders for Construction Materials
Foilsithe / Cruthaithe: (2023)

Low Binder Concrete and Mortars
Foilsithe / Cruthaithe: (2020)

Advances in Binders for Construction Materials
Foilsithe / Cruthaithe: (2023)

Integration of stability model of PV system by using WEEC model and generic type 4 PV model in PSSE software / Mohammad Nayeim Fazumy Mohd Tajudin, Mohd Naji Mohd Hussain and Mashitah Mohd Hussain
de réir: Mohd Tajudin, Mohammad Nayeim Fazumy, et al.
Foilsithe / Cruthaithe: (2023)

Exercising ethnobiological resilience in turbulent times and places: in memoriam Sayed Hussain (1998-2023)
de réir: Wahid Hussain, et al.
Foilsithe / Cruthaithe: (2023)

Defectiveness in tender document / Muhammad Alif Syahmi Ahmad Fauzi and Kharizam Ismail
de réir: Ahmad Fauzi, Muhammad Alif Syahmi, et al.
Foilsithe / Cruthaithe: (2019)

Moulds in floor dust - a particular problem in mechanically ventilated rooms? A study of adolescent schoolboys under the Danish moulds in buildings program
de réir: Harald W Meyer, et al.
Foilsithe / Cruthaithe: (2011)