Slika omota

Surface roughness and roundness optimization on turning process of Aluminium Alloy with Taguchi Method / Sudjatmiko ... [et al.]

In this study, surface roughness and roundness were established as process parameters on turning process of Aluminium Alloy by using Taguchi Method. Taguchi design of experiments (DOE) is used to analyze the effect of each parameters design. The four parameters are nose radius (nr), spindle speed (n...

Spremljeno u:

Bibliografski detalji
Glavni autori:	Sudjatmiko, djatmiko. mlg@gmail. com (Autor), Soenoko, Rudy (Autor), Suprapto, Agus (Autor), Choiron, Moch. Agus (Autor)
Format:	Knjiga
Izdano:	Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM), 2017.
Teme:	Article PeerReviewed
Online pristup:	Link Metadata
Oznake:	Dodaj oznaku Bez oznaka, Budi prvi tko označuje ovaj zapis!

Slični predmeti

Aluminium Alloys Theory and Applications
Izdano: (2011)

Aluminium Alloys and Composites
Izdano: (2020)

Aluminium Alloys Design and Development of Innovative Alloys, Manufacturing Processes and Applications
Izdano: (2022)

Aluminium Alloys New Trends in Fabrication and Applications
Izdano: (2012)

Advanced Aluminium Composites and Alloys
Izdano: (2021)

Mechanical Behaviour of Aluminium Alloys
od: Filippo Berto (Ed.)
Izdano: (2018)

Structure and Properties of Aluminium Alloys
Izdano: (2021)

Aluminium Alloys Recent Trends in Processing, Characterization, Mechanical behavior and Applications
Izdano: (2017)

Optimisation of surface roughness when CNC Turning of Al-6061: Application of Taguchi Design of experiments and genetic algorithm / Boppana V. Chowdary...[et al.]
od: V. Chowdary, Boppana, i dr.
Izdano: (2019)

Effect of compressed air and cutting speed on surface roughness of 6061 Aluminium Alloy / Nor Aznan Mohd Nor...[et al.]
od: Mohd Nor, Nor Aznan, i dr.
Izdano: (2019)

Recent Trends in Processing and Degradation of Aluminium Alloys
Izdano: (2011)

Colorimetric determination of chromium in aluminium alloys by diphenylcarbazide method
od: Peter Chikezie Ayogu, i dr.
Izdano: (2019)

Chapter Additive Manufacturing of Al Alloys and Aluminium Matrix Composites (AMCs)
od: Manfredi, Diego
Izdano: (2014)

Chapter Additive Manufacturing of Al Alloys and Aluminium Matrix Composites (AMCs)
od: Manfredi, Diego
Izdano: (2014)

THE STUDY OF ROUGHNESS AND RESISTANCE TO CORROSION OF DENTAL ALLOYS IN THE ORAL ENVIRONMENT
od: Adina Oana Armencia, i dr.
Izdano: (2020)

Optimization of machining parameters using taguchi coupled grey relational approach while turning inconel 625 / Chinmaya Padhy and Pariniti Singh
od: Padhy, Chinmaya, i dr.
Izdano: (2021)

TARI DAMBUS SILAT DI DESA SEBRANG KECAMATAN TOBOALI KABUPATEN BANGKA SELATAN
od: Dinda Fernanda, _dindafernanda95@gmail.com
Izdano: (2019)

Prevalence of Peri-Implantitis in Implants with Turned and Rough Surfaces: a Systematic Review
od: Nikola Saulacic, i dr.
Izdano: (2019)

Analytical prediction of fatigue resistance of additively manufactured aluminium alloy based on Murakami method / Matthias Oberreiter ... [et al.]
od: Oberreiter, Matthias, i dr.
Izdano: (2023)

Effect of retrogression and re-ageing treatment on stressed component of wrought 6061 aluminium alloy / Rasdi Deraman and Sunara Purwadaria
od: Deraman, Rasdi, i dr.
Izdano: (2008)

Evaluation of roughness and micromorphology of epoxy paint on cobalt-chromium alloy before and after thermal cycling
od: Alessandra Cardoso da Silva Nascimento, i dr.
Izdano: (2013)

Perbedaan Kecurangan Akademik Ditinjau Dari Jenis Kelamin Dan Bidang Ilmu Pada Mahasiswa
od: Bagus Setiawan, Imam, i dr.
Izdano: (2017)

Enhancement of surface quality of DMLS aluminium alloy using RSM optimization and ANN modelling / A.P.S.V.R. Subrahmanyam ... [et al.]
od: Subrahmanyam, A.P.S.V.R, i dr.
Izdano: (2021)

ANALISIS PENGENDALIAN KUALITAS KETIDAKSESUAIAN PROSES FABRIKASI DENGAN PENDEKATAN METODE TAGUCHI
od: Dian Sousani Ananta,
Izdano: (2020)

Preparation of Pickering Emulsions Stabilized by Modified Silica Nanoparticles via the Taguchi Approach
od: Fatemeh Heidari, i dr.
Izdano: (2022)

Assessment of Micro-vessel Density in Brain Glioma by CD105 Expression
od: Hiva Saffar, i dr.
Izdano: (2018)

Characterization of Aluminium-Silicon (Al-Si) cast alloy refined with Titanium Diboride (TiB2) and Scandium (Sc) / R. Rosmamuhamadani... [et al.]
od: R., Rosmamuhamadani, i dr.
Izdano: (2018)

Effect and optimization of cutting speed and depth of cut in half-immersion up-milling of 6061 aluminium alloy / Nor Aznan Mohd Nor...[et al.]
od: Mohd Nor, Nor Aznan, i dr.
Izdano: (2019)

Optimization of tool life and surface roughness for hypereutectic Al - si alloys in face milling / Kamal Othman...[et al.]
od: Othman, Kamal, i dr.
Izdano: (2020)

An Efficient Taguchi Approach for the Performance Optimization of Health, Safety, Environment and Ergonomics in Generation Companies
od: Ali Azadeh, i dr.
Izdano: (2015)

Optimization of viscoelastic behaviors of bioinspired asymmetric helicoidal CFRP composites using Taguchi Method
od: Chidume Nwambu, i dr.
Izdano: (2023)

PENENTUAN FAKTOR-FAKTOR YANG BERPENGARUH PADA PROSES INJEKSI KONVENSIONAL DENGAN METODE TAGUCHI
od: Khaerunisa Mahmudah, -
Izdano: (2010)

Taguchi analysis of the tensile behaviour of unaged and hygrothermally aged asymmetric helicoidally stacked CFRP composites
od: Nwambu CN, i dr.
Izdano: (2023)

Optimization and characterization of biosynthesized gold nanoparticles by Oenothera biennis seed extract using taguchi method
od: Mahla Asadi, i dr.
Izdano: (2020)

Taguchi design optimization of curcumin loading in mesoporous silica nanoparticles with variable particle and pore sizes
od: Mina Shafiee, i dr.
Izdano: (2022)

Preparation of poly(aluminium chloride) and poly(aluminium silicate chloride) from sludge of C₅ resin
od: Sookhasart Jareronpol
Izdano: (2013)

Light Alloys and High-Temperature Alloys
Izdano: (2022)

Pengaru Bahan Terak Aluminium dan Besi Terhadap Pengujian Keausan Pada Pembuatan Batu Gerinda
od: Ervana, Ananta Rendy, i dr.
Izdano: (2015)

Design parameters optimization in CNC machining based on Taguchi, ANOVA, and screening method / Armansyah ... [et al.]
od: -, Armansyah, i dr.
Izdano: (2023)

Development and optimization of erythromycin-loaded lipid-based gel by Taguchi design: In vitro characterization and antimicrobial evaluation
od: Pallavi Dhillon, i dr.
Izdano: (2019)