A preliminary study on the properties oil palm board: Effect of resin content / Nurrohana Ahmad ... [et al.]
Three-layer oil palm boards were produced using urea formaldehyde resin. Face and back layer particles were sprayed with 10%, 12% and 14% resin while the core was maintained at 10% resin content. The oil palm board was hot-pressed at 165°C for 6 minutes at a pressure of 120 kgcm-2. With increasing r...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Book |
| Published: |
Universiti Teknologi MARA Cawangan Pahang,
2007-10.
|
| Subjects: | |
| Online Access: | Link Metadata |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Three-layer oil palm boards were produced using urea formaldehyde resin. Face and back layer particles were sprayed with 10%, 12% and 14% resin while the core was maintained at 10% resin content. The oil palm board was hot-pressed at 165°C for 6 minutes at a pressure of 120 kgcm-2. With increasing resin content, all the mechanical and physical properties improved significantly. However, all board properties did not meet the minimum requirement of the BS 5669. |
|---|---|
| Item Description: | https://ir.uitm.edu.my/id/eprint/36025/1/36025.PDF |