A preliminary study on the properties oil palm board: Effect of resin content / Nurrohana Ahmad ... [et al.]
Three-layer oil palm boards were produced using urea formaldehyde resin. Face and back layer particles were sprayed with 10%, 12% and 14% resin while the core was maintained at 10% resin content. The oil palm board was hot-pressed at 165°C for 6 minutes at a pressure of 120 kgcm-2. With increasing r...
Guardat en:
Autors principals: | Ahmad, Nurrohana (Autor), Kasim, Jamaludin (Autor), Yamani, Shaikh Abdul Karim (Autor), Mohktar, Anis (Autor), Yunus, Nor Yuziah (Autor) |
---|---|
Format: | Llibre |
Publicat: |
Universiti Teknologi MARA Cawangan Pahang,
2007-10.
|
Matèries: | |
Accés en línia: | Link Metadata |
Etiquetes: |
Afegir etiqueta
Sense etiquetes, Sigues el primer a etiquetar aquest registre!
|
Ítems similars
-
Effects of height portion and distance from pith on the density of oil palm trunk / Nurrohana Ahmad and Jamaludin Kasim
per: Ahmad, Nurrohana, et al.
Publicat: (2010) -
Screw-withdrawal properties of batai (Parensenthes falcataria) particleboard / Safura Mamat, Nurrohana Ahmad and Jamaludin Kasim
per: Mamat, Safura, et al.
Publicat: (2011) -
Effects of particle sizes, resin content and board densities on the properties of phenol formaldehyde particleboard from oil palm trunk particles / Jamaludin Kasim ... [et al.]
per: Kasim, Jamaludin, et al.
Publicat: (2010) -
Particleboard properties from Mahang Gajah (Macarranga gigantea) particles / Nurrohana Ahmad, Jamaludin Kasim and Nafizah Hassan
per: Ahmad, Nurrohana, et al.
Publicat: (2011) -
Relationship of board density and resin contents towards the particleboard properties from weathered oil palm trunk / Jamaludin Kasim ...[et al.]
per: Kasim, Jamaludin, et al.
Publicat: (2013)