Bearbmagovva

Rheological properties of titanium niobium based feedstocks for metal injection moulding / Rozie Nani Ahmad...[et al.]

The rheological properties are very important in the metal injection moulding (MIM) process where it can give indication of flow ability of mold feedstock during injection moulding. In this study, the rheological properties of Titanium Niobium based feedstock with polyethylene (PE) and palm stearin...

Furkejuvvon:

Bibliográfalaš dieđut
Váldodahkkit:	Ahmad, Rozie Nani (Dahkki), Muhamad, Norhamidi (Dahkki), Sulong, Abu Bakar (Dahkki), Wahi, Azizah (Dahkki), Mohd Salleh, Farrahshaida (Dahkki)
Materiálatiipa:	Girji
Almmustuhtton:	Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM), 2017.
Fáttát:	Article PeerReviewed
Liŋkkat:	Link Metadata
Fáddágilkorat:	Lasit fáddágilkoriid Eai fáddágilkorat, Lasit vuosttaš fáddágilkora!

Geahča maid

Parameter Optimization of Sintering Ti-6Al-7Nb Powder and Palm Stearin Binder System for the Highest Sintered Density using the Taguchi Method / Rozie Nani Ahmad...[et al.]
Dahkki: Ahmad, Rozie Nani, et al.
Almmustuhtton: (2017)

The Characterization and Rheological Investigation of Materials for Powder Injection Moulding / Ukwueze Bonaventure Emeka...[et al.]
Dahkki: Ukwueze, Bonaventure Emeka, et al.
Almmustuhtton: (2017)

Determination of Critical Powder Loading of Titanium-Hydroxyapatite with Powder Space Holder for Powder Injection Molding Feedstocks / Mohd Yusuf Zakaria...[et al.]
Dahkki: Zakaria, Mohd Yusuf, et al.
Almmustuhtton: (2017)

A study on yarn abrasion resistance / Mohd Rozi Ahmad ...[et al.]
Dahkki: Ahmad, Mohd Rozi, et al.
Almmustuhtton: (2004)

Rheological Properties Of Titanium Alloy (Ti6Al4V) - Wollastonite (W) Composite Using Palm Stearin as Based Binder / Mohd Ikram Ramli...[et al.]
Dahkki: Ramli, Mohd Ikram, et al.
Almmustuhtton: (2017)

Advancements in Biomass Feedstock Preprocessing: Conversion Ready Feedstocks
Almmustuhtton: (2020)

Rheological, mechanical and physical properties of poly-lactic acid (PLA)/ hydroxyapatites (HA) composites prepared by an injection moulding process / Afeeqa Puteri Marzuki ... [et al.]
Dahkki: Marzuki, Afeeqa Puteri, et al.
Almmustuhtton: (2022)

Tantalum, Niobium and Titanium Coatings for Biocompatibility Improvement of Dental Implants
Dahkki: Vajihesadat Mortazavi, et al.
Almmustuhtton: (2007)

Flow Behaviour Characterization of Hydroxyapatite for Powder Injection Moulding (PIM) / Farrahshaida Mohd Salleh...[et al.]
Dahkki: Mohd Salleh, Farrahshaida, et al.
Almmustuhtton: (2017)

Gasification for Low-grade Feedstock
Almmustuhtton: (2018)

Evolusi penggunaan motif dan ragam hias dalam tenunan songket / Nani Hartina Ahmad...[et al.]
Dahkki: Ahmad, Nani Hartina, et al.
Almmustuhtton: (2015)

In vitro genotoxic study reinforces the use of titanium-35niobium alloy in biomedical implants
Dahkki: Dennia Perez de Andrade, et al.
Almmustuhtton: (2020)

The study of sintering behavior of stainless steel 17-4PH-stainless steel 316L for two materials powders injection molding (2C-PIM) process / Najlaa Nazihah Mas'ood...[et al.]
Dahkki: Mas'ood, Najlaa Nazihah, et al.
Almmustuhtton: (2019)

Set panggung acara komedi televisi "Opera Van Java" / Savitri Nani Sriwardani
Dahkki: Nani Sriwardani, Savitri
Almmustuhtton: (2016)

Application of response surface methodology for parameters optimization in hot pressing kenaf reinforced biocomposites / Izdihar Tharazi... [et al.]
Dahkki: Tharazi, Izdihar, et al.
Almmustuhtton: (2020)

A comparative evaluation of metallurgical properties of stainless steel and TMA archwires with timolium and titanium niobium archwires - An <i>in vitro</i> study
Dahkki: Vijayalakshmi R, et al.
Almmustuhtton: (2009)

Students' experience in marketing communication through social media/ Nani Ilyana Shafie ... [et al.]
Dahkki: Shafie, Nani Ilyana, et al.
Almmustuhtton: (2023)

The Moulding of Ukraine
Dahkki: Kataryna Wolczuk
Almmustuhtton: (2001)

Analysis of optical frequency domain reflectometry (OFDR) interferometer for passive optical network (PON) monitoring / Faris Aiman Asha'ari, Nani Fadzlina Naim, and A. Ashrif A. Bakar
Dahkki: Asha'ari, Faris Aiman, et al.
Almmustuhtton: (2019)

Influence of niobium pentoxide addition on the properties of glass ionomer cements
Dahkki: Isadora Martini Garcia, et al.
Almmustuhtton: (2016)

Radiopacity and cytotoxicity of Portland cement associated with niobium oxide micro and nanoparticles
Dahkki: Leticia Boldrin MESTIERI, et al.
Almmustuhtton: (2014)

Local heritage food as a significant factor in Malaysia gastronomy tourism / Hafizan Mat Som, Nani Masnida Nordin and Amzari Jihadi Ghazali.
Dahkki: Mat Som, Hafizan, et al.
Almmustuhtton: (2019)

Relationship between perceived organizational support and organizational commitment among teachers in private primary schools / Mazida Ismail, Muruga Chinniah and Nani Shuhada Sehat
Dahkki: Ismail, Mazida, et al.
Almmustuhtton: (2011)

Production and applications of biodiesel from high acid value feedstocks / Zulkafli Hassan ... [et al.]
Dahkki: Hassan, Zulkafli, et al.
Almmustuhtton: (2018)

Rheology
Almmustuhtton: (2012)

KAJIAN SIFAT OPTIK FILM TIPIS BST DIDADAH NIOBIUM DAN TANTALUM
Dahkki: Farida Huriawati, et al.
Almmustuhtton: (2016)

A Data Mining Analysis on Niobium in Dentistry: Promising Alloys for Dental Materials
Dahkki: Karla Lorene de França Leite, et al.
Almmustuhtton: (2024)

Evaluation of an antibacterial orthodontic adhesive incorporated with niobium-based bioglass: an in situ study
Dahkki: Felipe Weidenbach DEGRAZIA, et al.
Almmustuhtton: (2019)

Study on stability of a novel binder system based on palm stearin in metal injection moulding application / Muhammad Hussain Ismail ... [et al.]
Dahkki: Ismail, Muhammad Hussain, et al.
Almmustuhtton: (2007)

Physical and mechanical properties of thin paper sheets made from onion peels (Allium cepa) / Mohammad Harris M. Yahya, Normala Hassim and Mohd Rozi Ahmad
Dahkki: M. Yahya, Mohammad Harris, et al.
Almmustuhtton: (2020)

Polymer Rheology
Almmustuhtton: (2018)

PENGARUH METODE SALURAN PENDINGIN PADA MOULD CONFORMAL LAMINASI, MOULD LURUS DAN MOULD CONFORMAL SOFT TOOLING TERHADAP CACAT PRODUK WARPAGE, SINK MARK DAN PENGUKURAN KESELINDRISAN PRODUK PADA MESIN MANUAL INJECTION MOULDING PLASTIC
Dahkki: SUSANTO, SUSANTO
Almmustuhtton: (2011)

Performance of multiwavelength laser utilizing Fabry-Pérot interferometer in different cavity configuration using hybrid raman-EDF gains / Nani Fadzlina Naim ...[et al.]
Dahkki: Naim, Nani Fadzlina, et al.
Almmustuhtton: (2022)

Higher educational building defects in Perak / Muhammad Syafiq Muhd Rozi and Noraini Md Zain
Dahkki: Muhd Rozi, Muhammad Syafiq, et al.
Almmustuhtton: (2019)

The Effect of Anxiety Level to The Menstrual Cycle on DIII Midwifery Student at STIKes Nani Hasanuddin Makassar
Dahkki: Dahniar Dahniar, et al.
Almmustuhtton: (2022)

Rheology New Concepts, Applications and Methods
Almmustuhtton: (2013)

Plaster Mould Selection for Ceramic Slip Rotary Moulding System (CSRM) / Norrul Hafizan Ab Wahab ...[et al.]
Dahkki: Ab Wahab, Norrul Hafizan, et al.
Almmustuhtton: (2017)

Four-Dimensional Printed Construct from Temperature-Responsive Self-Folding Feedstock for Pharmaceutical Applications with Machine Learning Modeling
Dahkki: Purushottam Suryavanshi, et al.
Almmustuhtton: (2023)

Optimization of Hot Pressing Process for Unidirectional Kenaf Polypropylene Composites by Full Factorial Design / Dulina Tholibon...[et al.]
Dahkki: Tholibon, Dulina, et al.
Almmustuhtton: (2017)

Rheology and Processing of Polymers
Almmustuhtton: (2022)