Bearbmagovva

An Investigation into the Impact of Flexural Elastic Modulus on the Dimensional Instability in CNC Turning of Titanium Alloy Grade 5 - Ti6Al4V / Sangeeth Suresh...[et al.]

Titanium Alloy Grade 5 (Ti6Al4V) has proven to be the most commonly used grade of titanium due to its excellent combination of physical and mechanical properties. However, Ti6Al4V has a relatively low modulus of elasticity (110 GPa) which in turn causes the material to be springy in nature. This spr...

Furkejuvvon:

Bibliográfalaš dieđut
Váldodahkkit:	Suresh, Sangeeth (Dahkki), Abdul Hamid, Darulihsan (Dahkki), Yazid, MZA (Dahkki), Che Daud, Nur Rusydina (Dahkki), Mohd Din, Nik Nur Liyana (Dahkki)
Materiálatiipa:	Girji
Almmustuhtton:	Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM), 2017.
Fáttát:	Article PeerReviewed
Liŋkkat:	Link Metadata
Fáddágilkorat:	Lasit fáddágilkoriid Eai fáddágilkorat, Lasit vuosttaš fáddágilkora!

Geahča maid

Composition, tensile strength, and elastic modulus of Orden as cast post alloy
Dahkki: Novi Anggraini, et al.
Almmustuhtton: (2010)

Comparative study of flexural strength and elasticity modulus in two types of direct fiber-reinforced systems
Dahkki: Alfredo de Aquino Gaspar Junior, et al.
Almmustuhtton: (2009)

Elastic modulus and flexural strength comparisons of high-impact and traditional denture base acrylic resins
Dahkki: Nour M. Ajaj-ALKordy, et al.
Almmustuhtton: (2014)

Flexural modulus, flexural strength, and stiffness of fiber-reinforced posts
Dahkki: Novais Veridiana, et al.
Almmustuhtton: (2009)

Influence of light-curing units on the flexural strength Influence of light-curing units on the flexural strength and flexural modulus of different resin composites and flexural modulus of different resin composites
Dahkki: William Cunha Brandt, et al.
Almmustuhtton: (2016)

Denture base polymers for analog and digital manufacturing: comparative study of the flexural strength, elastic modulus, and compressive strength of their mechanical properties
Dahkki: Andrés Felipe Vásquez-Niño, et al.
Almmustuhtton: (2022)

STUDIES ON VICKERS HARDNESS AND THE ELASTICITY MODULUS OF MATERIALS FOR DENTAL RESTORATION
Dahkki: Cristina Angela Ghiorghe, et al.
Almmustuhtton: (2018)

Shrinkage stress and elastic modulus assessment of bulk-fill composites
Dahkki: Fabio Antonio Piola Rizzante, et al.
Almmustuhtton: (2019)

Comparison of Elasticity Modulus and Nanohardness of Various Dental Restorative Materials
Dahkki: Gunce Ozan, et al.
Almmustuhtton: (2021)

Study of the surface hardness and modulus of elasticity of conventional and microwave-cured acrylic resins
Dahkki: Márcio José Fraxino Bindo, et al.
Almmustuhtton: (2009)

Evaluation of the Transverse Strength and Elastic Modulus of High Impact Denture Base Material
Dahkki: gonca deste, et al.
Almmustuhtton: (2020)

Flexural strength and modulus of elasticity of different types of resin-based composites Resistência à flexão e módulo de elasticidade de diferentes tipos de resina composta
Dahkki: Sinval Adalberto Rodrigues Junior, et al.
Almmustuhtton: (2007)

Influence of elastic modulus of intraradicular posts on the fracture load of roots restored with full crowns
Dahkki: Ana Maria Estivalete MARCHIONATTI, et al.

Effects of different glass fibers on the transverse strength and elastic modulus of repairing acrylic resin
Dahkki: Derya Ozdemir Dogan, et al.
Almmustuhtton: (2013)

The Effect of Aging on Nano-Hardness and Modulus of Elasticity of Four Types of Composites: An in-vitro Study
Dahkki: Ali Eskandarizadeh, et al.
Almmustuhtton: (2016)

Flexural strength, flexural modulus and microhardness of milled vs. fused deposition modeling printed Zirconia; effect of conventional vs. speed sintering
Dahkki: Maher S. Hajjaj, et al.
Almmustuhtton: (2024)

Silorane- and high filled-based"low-shrinkage" resin composites: shrinkage, flexural strength and modulus
Dahkki: Cesar Augusto Galvão Arrais, et al.
Almmustuhtton: (2013)

Compresive Strengths And Modulus Of Elasticity Of Steel Fiber Reinforced Concrete Under Different Temperature Conditions
Dahkki: Masoud, Mohamed Alfitouri, et al.
Almmustuhtton: (2015)

Dr. Suresh Raghunath Tambwekar (1938-2014): The founder of ISCLPCA
Dahkki: Viraj Tambwekar
Almmustuhtton: (2015)

The effect of Chlorhexidine 0.12% Mouthwash on Microhardness and Elastic Modulus of Dentin and Cementum of Healthy and Periodontally Involved Extracted Teeth
Dahkki: Seyed Ali Banihashemrad, et al.
Almmustuhtton: (2021)

Investigation on surface roughness and MRR in WEDM of titanium grade 7 (Ti-0.15Pd) alloy using statistical techniques / H. R. Basavaraju, S. S. Manjunatha and R. Suresh
Dahkki: H.R., Basavaraju, et al.
Almmustuhtton: (2023)

Spreadsheet to analyze the comparative of elasticities properties of aluminum alloy materials
Dahkki: Sudirman Sudirman, et al.
Almmustuhtton: (2023)

Effect of Cooling Rate on the Longitudinal Modulus of Cu3Sn Phase of Ag-Sn-Cu Amalgam Alloy (Part I)
Dahkki: R. H. Rusli
Almmustuhtton: (2015)

Effect of Cooling Rate on the Longitudinal Modulus of Cu3Sn Phase of Ag-Sn-Cu Amalgam Alloy (Part II)
Dahkki: R. H. Rusli
Almmustuhtton: (2015)

PENGEMBANGAN MESIN CNC VIRTUAL SEBAGAI MEDIA INTERAKTIF DALAM PEMBELAJARAN PEMROGRAMAN CNC
Dahkki: Bambang Setyo Hari Purwoko
Almmustuhtton: (2013)

The Effectiveness of Dry Needling on Dimensions and Elastic Modulus of the Nasolabial Fold due to Aging Process: An Uncontrolled before-after Clinical Trial Study
Dahkki: Parinaz Omidi, et al.
Almmustuhtton: (2020)

Design parameters optimization in CNC machining based on Taguchi, ANOVA, and screening method / Armansyah ... [et al.]
Dahkki: -, Armansyah, et al.
Almmustuhtton: (2023)

Evaluation of flexural bond strength of porcelain to used nickel-chromium alloy in various percentages
Dahkki: VNV Madhav, et al.
Almmustuhtton: (2012)

Properties of Injection Molded Nanocomposites and Blends Based on PLA, PHBV and L-CNC / Martin Borůvka...[et al.]
Dahkki: Borůvka, Martin, et al.
Almmustuhtton: (2017)

The role of bulk modulus in epidural placement
Dahkki: Glen Atlas
Almmustuhtton: (2010)

Optimisation of surface roughness when CNC Turning of Al-6061: Application of Taguchi Design of experiments and genetic algorithm / Boppana V. Chowdary...[et al.]
Dahkki: V. Chowdary, Boppana, et al.
Almmustuhtton: (2019)

The Effects of Elastic Ankle Taping on Static and Dynamic Postural Control in Individuals With Chronic Ankle Instability
Dahkki: Jin-seok Lim, et al.
Almmustuhtton: (2021)

EFEKTIFITAS PENGGUNAAN CNC SIMULATOR UNTUK MENINGKATKAN HASIL BELAJAR DALAM MATA PELAJARAN CNC DASAR DI SMKN 6 BANDUNG
Dahkki: Ilham, Fadli
Almmustuhtton: (2013)

An enquiry into impact of HR architecture on human capital pool / Jyotirmayee Choudhury, Suresh Ch. Nayak and Noorlalia Hj Yunus
Dahkki: Choudhury, Jyotirmayee, et al.
Almmustuhtton: (2011)

Flexural strength of polyether ether ketone high-performance polyether in comparison with base metal alloy and Zirconia ceramic.
Dahkki: Negar Barjini, et al.
Almmustuhtton: (2020)

PENGEMBANGAN MEDIA PEMBELAJARAN INTERAKTIF BERBASIS ANDROID PADA MATERI INTERPOLASI MELINGKAR DALAM MATA KULIAH CNC DASAR
Dahkki: Nur Jayah, -
Almmustuhtton: (2019)

Low energy impact on the short kenaf fibre reinforced epoxy composites: effect to the residual strength and modulus / Syarifah Yunus ... [et al.]
Dahkki: Yunus, Syarifah, et al.
Almmustuhtton: (2015)

Resilient modulus and influencing parameters of unbound crushed limestone
Dahkki: Chanpheng Phommavone
Almmustuhtton: (2014)

Performance implications of diversification strategies during institutional transformations: an emerging market study / Suresh Srinivasan, Thenmozhi M and Vijayaraghavan P
Dahkki: Srinivasan, Suresh, et al.
Almmustuhtton: (2020)

Insertion torque, flexural strength and surface alterations of stainless steel and titanium alloy orthodontic mini-implants: an in vitro study
Dahkki: Gustavo Lopes PULS, et al.
Almmustuhtton: (2024)