Kansikuva

Rheological Properties Of Titanium Alloy (Ti6Al4V) - Wollastonite (W) Composite Using Palm Stearin as Based Binder / Mohd Ikram Ramli...[et al.]

Powder injection molding (PIM) is a net-shaping process that can fabricate complex shaped of products in large quantities by using metal and ceramic powders. Biocompatible materials such as titanium alloy (Ti6Al4V) and wollastonite (W) have been widely used as bone implant's applications. Howev...

Tallennettuna:

Bibliografiset tiedot
Päätekijät:	Ramli, Mohd Ikram (Tekijä), Sulong, Abu Bakar (Tekijä), Muhamad, Norhamidi (Tekijä), Muchtar, Andanastuti (Tekijä), Zakaria, Mohd Yusuf (Tekijä)
Aineistotyyppi:	Kirja
Julkaistu:	Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM), 2017.
Aiheet:	Article PeerReviewed
Linkit:	Link Metadata
Tagit:	Lisää tagi Ei tageja, Lisää ensimmäinen tagi!

Samankaltaisia teoksia

Study on stability of a novel binder system based on palm stearin in metal injection moulding application / Muhammad Hussain Ismail ... [et al.]
Tekijä: Ismail, Muhammad Hussain, et al.
Julkaistu: (2007)

Parameter Optimization of Sintering Ti-6Al-7Nb Powder and Palm Stearin Binder System for the Highest Sintered Density using the Taguchi Method / Rozie Nani Ahmad...[et al.]
Tekijä: Ahmad, Rozie Nani, et al.
Julkaistu: (2017)

Sintered strength of ti-6Al-4V by metal injection molding (MIM) using palm stearin binder / N. H. Mohamad Nor...[et al.]
Tekijä: N. H., Mohamad Nor, et al.
Julkaistu: (2019)

Characteristic Of The YTTRIA Stabilized Zirconia (YSZ) for Ceramic Injection Moulding by Using Palm Stearin as a Primary Binder / Mahfuzah Zainudin and Muhammad Hussain Ismail
Tekijä: Zainudin, Mahfuzah, et al.
Julkaistu: (2017)

Rheological properties of titanium niobium based feedstocks for metal injection moulding / Rozie Nani Ahmad...[et al.]
Tekijä: Ahmad, Rozie Nani, et al.
Julkaistu: (2017)

The Characterization and Rheological Investigation of Materials for Powder Injection Moulding / Ukwueze Bonaventure Emeka...[et al.]
Tekijä: Ukwueze, Bonaventure Emeka, et al.
Julkaistu: (2017)

Effects of additives in reducing the odour concentration emanating from water scrubber in rubber processing factory/ Mohd Ikram Mohammad... [et al.]
Tekijä: Mohammad, Mohd Ikram, et al.
Julkaistu: (2017)

How students utilize social media in achieving academic success? / Fadhli Dzil Ikram Ishak ... [et al.]
Tekijä: Ishak, Fadhli Dzil Ikram, et al.
Julkaistu: (2023)

A language learning journey through learner diaries / Ikram Mahadzi, Kamalanathan M. Ramakrishnan and Normah Ismail
Tekijä: Mahadzi, Ikram, et al.
Julkaistu: (2011)

The effects of internal and external economic variables on the Islamic banks' profitability in Malaysia / Mohamad Azwan Md Isa and Fakhrullah Ikram Baharudin.
Tekijä: Md Isa, Mohamad Azwan, et al.
Julkaistu: (2020)

Rheology of palm olein emulsions stabilized by non-ionic surfactants as potential carriers for drug delivery / Mohamed Sufian Mohd Nawi and Kausar Ahmad
Tekijä: Mohd Nawi, Mohamed Sufian, et al.
Julkaistu: (2006)

Prevalence and factors of overweight and obese among adolescent in Asia: a scoping review / Norihan Mat Hussin and Emmy Hainida Khairul Ikram
Tekijä: Mat Hussin, Norihan, et al.
Julkaistu: (2022)

Effect of pH of Suspension and Mechanical Treatment on Nanosized Zirconia Dispersion / Noor Faeizah Amat...[et al.]
Tekijä: Amat, Noor Faeizah, et al.
Julkaistu: (2017)

Coffee capsule vending machine / Mohd Sufian Ramli ... [et al.]
Tekijä: Ramli, Mohd Sufian, et al.
Julkaistu: (2021)

Influence of pre-strain on the strain rate response of Ni-Ti shape memory alloy / Nur Aliah Mohd Khairi...[et al.]
Tekijä: Mohd Khairi, Nur Aliah, et al.
Julkaistu: (2019)

Shahimi M-Studio / Mohd Shahridwan Ramli ... [et al.]
Tekijä: Ramli, Mohd Shahridwan, et al.
Julkaistu: (2020)

Homeopathy in Malaysia / Mohamad Arif Aizuddin Mohd Ramli...[et.al]
Tekijä: Mohd Ramli, Mohamad Arif Aizuddin, et al.
Julkaistu: (2018)

The influence of celebrity endorsement towards buying decision using online advertisement / Noryusnita Ramli ... [et al.]
Tekijä: Ramli, Noryusnita, et al.
Julkaistu: (2023)

Mechanical and bioactivity properties of ti-ha-xnb alloy matrix composite produced via powder metallurgy route for bone implant / Farrah Noor Ahmad ... [et al.]
Tekijä: Noor Ahmad, Farrah, et al.
Julkaistu: (2020)

An Investigation into the Impact of Flexural Elastic Modulus on the Dimensional Instability in CNC Turning of Titanium Alloy Grade 5 - Ti6Al4V / Sangeeth Suresh...[et al.]
Tekijä: Suresh, Sangeeth, et al.
Julkaistu: (2017)

Perspektif kitab Quran terhadap bidang pengurusan rekod / Ahmad Azman Mohamad Ramli ... [et al.]
Tekijä: Mohamad Ramli, Ahmad Azman, et al.
Julkaistu: (2017)

Optimization of tool life and surface roughness for hypereutectic Al - si alloys in face milling / Kamal Othman...[et al.]
Tekijä: Othman, Kamal, et al.
Julkaistu: (2020)

Pattern of fruits and vegetables intake among Health Sciences Students in Public University UiTM Selangor/ Emmy Hainida Khairul Ikram and Shazlen Amera Rohadi
Tekijä: Khairul Ikram, Emmy Hainida, et al.
Julkaistu: (2019)

The study of sintering behavior of stainless steel 17-4PH-stainless steel 316L for two materials powders injection molding (2C-PIM) process / Najlaa Nazihah Mas'ood...[et al.]
Tekijä: Mas'ood, Najlaa Nazihah, et al.
Julkaistu: (2019)

The determinants of food heritage based on age in Klang Valley, Malaysia / Adilah M.D Ramli... [et al.]
Tekijä: M.D Ramli, Adilah, et al.
Julkaistu: (2020)

Is titanium alloy Ti‐6Al‐4 V cytotoxic to gingival fibroblasts-A systematic review
Tekijä: Jonathan Willis, et al.
Julkaistu: (2021)

Optimization of Hot Pressing Process for Unidirectional Kenaf Polypropylene Composites by Full Factorial Design / Dulina Tholibon...[et al.]
Tekijä: Tholibon, Dulina, et al.
Julkaistu: (2017)

A study on compressive strength of concrete cointaining MK7003 with various water binder ratio / Clotilda Petrus ... [et al.]
Tekijä: Clotilda, Petrus, et al.
Julkaistu: (2005)

Determination of Critical Powder Loading of Titanium-Hydroxyapatite with Powder Space Holder for Powder Injection Molding Feedstocks / Mohd Yusuf Zakaria...[et al.]
Tekijä: Zakaria, Mohd Yusuf, et al.
Julkaistu: (2017)

Influence of the final temperature of investment healting on the tensile strength and Vickers hardness of CP Ti and Ti-6Al-4V alloy
Tekijä: Pedro César Garcia Oliveira, et al.
Julkaistu: (2007)

Rheology
Julkaistu: (2012)

Evaluating the influence of Ti6Al4V alloy particles on mechanical properties of heat-cured PMMA
Tekijä: Nihad H AlFuraiji, et al.
Julkaistu: (2024)

Evaluation of corrosion behavior of bioceramics coated commercially pure titanium and Ti-6Al-4V alloy
Tekijä: Hanan Ali, et al.
Julkaistu: (2014)

Engineering properties of Nanosilica modified asphalt binder/ Ahmad Kamil Arshad...[et al.]
Tekijä: Arshad, Ahmad Kamil, et al.
Julkaistu: (2019)

Tokoh lagu rakyat negeri Terengganu: Ramli Bin Ibrahim / Nur Syazana Abdullah ... [et al.]
Tekijä: Abdullah, Nur Syazana, et al.
Julkaistu: (2019)

Al-Qaradawi's juristic perspectives on zakah of agricultural wealth as reflected in his Fiqh Al Zakah / Muhammad Ikhlas Rosele, Luqman Abdullah and Mohd Anuar Ramli
Tekijä: Rosele, Muhammad Ikhlas, et al.
Julkaistu: (2013)

DIY stylus pen / Siti Rahmah Ramly ... [et al.]
Tekijä: Ramly, Siti Rahmah, et al.
Julkaistu: (2020)

Characterization of Aluminium-Silicon (Al-Si) cast alloy refined with Titanium Diboride (TiB2) and Scandium (Sc) / R. Rosmamuhamadani... [et al.]
Tekijä: R., Rosmamuhamadani, et al.
Julkaistu: (2018)

Effect of Multi-walled Carbon Nanotube on Mechanical Properties of Kenaf/Polypropylene Composites / Zakaria Razak...[et al.]
Tekijä: Razak, Zakaria, et al.
Julkaistu: (2017)

Investigation on Improvement of Surface Roughness Using Rotary Ultrasonic Assisted Machining Technique for Hardened Steel Material / Azlan Ramli...[et al.]
Tekijä: Ramli, Azlan, et al.
Julkaistu: (2017)