Slika na naslovnici

Tribological Effects of Additive Hybrid ZrO2/Al2O3 in Bio-Lubrication / Mimi Azlina Abu Bakar ... [et al.]

Bio-based oil application has increased dramatically in the lubrication industry as an alternative to conventional petroleum-based oil. Due to a huge demand towards sustainability, it is extremely important to make an effort in promoting alternative for synthetic bio-lubricant as an alternative to s...

Shranjeno v:

Bibliografske podrobnosti
Main Authors:	Abu Bakar, Mimi Azlina (Author), Kasolang, Salmiah (Author), Ahmad, Mohamad Ali (Author), Herman, Dedisaputra (Author)
Format:	Knjiga
Izdano:	Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM), 2018.
Teme:	Article PeerReviewed
Online dostop:	Link Metadata
Oznake:	Označite Brez oznak, prvi označite!

Podobne knjige/članki

Design and synthesis of Cr2O3-ZrO2: tailoring properties of Pt/Cr2O3-ZrO2 via different Cr2O3 loading for cracking activity / N.H.R. Annuar ... [et al.]
od: Annuar, N.H.R, et al.
Izdano: (2020)

Synthesis zirconia (ZrO2) and iron doped zirconia (Fe/ZrO2) photocatalyst for heavy metal removal / Adhwa Izzati Md. Taib and Norain Isa
od: Md. Taib, Adhwa Izzati, et al.
Izdano: (2020)

Reducing the risk of agglomeration and shrinkage ceramic body from Al2O3-ZrO2 composition / Norfauzi Tamin ... [et al.]
od: Tamin, Norfauzi, et al.
Izdano: (2023)

Tribology, Lubricants and Additives
Izdano: (2018)

Bactericidal Activity Study of ZrO-AgO Nanoparticles
od: Ayodeji Precious Ayanwale, et al.
Izdano: (2020)

Effect of Aging on the Microstructure and Optical Properties of Translucent ZrO 2 Ceramics
od: Korina Mešić, et al.
Izdano: (2021)

Comparative study of important parameters of different ZrO2 (Y2O3) ceramics
od: Csaba Hegedűs, et al.
Izdano: (2019)

Degradation of Pentachlorophenol in Aqueous Solution by the UV/ZrO 2 /H 2 O 2 Photocatalytic Process
od: Mohammad Reza Samarghandi, et al.
Izdano: (2015)

<p>Sintesis partikel zirkonia-alumina-silika (ZrO2-Al2O3-SiO2) dari pasir zirkon alam sebagai bahan pengisi komposit kedokteran gigi</p><p>Synthesis of zirconia-alumina-silica particles (ZrO2-Al2O3-SiO2) from natural zircon sand as dental composite fillers</p>
od: Silmina Susra, et al.
Izdano: (2017)

PENGARUH SUHU SINTER TERHADAP RAPAT MASSA DAN SIFAT MEKANIK KERAMIK MgAl2O4 DENGAN PENAMBAHAN 5% ZrO2
od: Ridwan Firdaus, -
Izdano: (2009)

Reinforcement of PMMA Denture Base Material with a Mixture of ZrO2 Nanoparticles and Glass Fibers
od: Mohammed M. Gad, et al.
Izdano: (2019)

Physical and Histological Evaluation of Coated Implant with Nano ZrO2 after Creation Titania Nanotubes
od: Mustafa Sh. Alhilfi, et al.
Izdano: (2016)

The efficacy of reinforcement of glass fibers and ZrO2 nanoparticles on the mechanical properties of autopolymerizing provisional restorations (PMMA)
od: Raghad S. Jamel, et al.
Izdano: (2023)

Effect of addition ZrO2-Al2O3 nanoparticles mixture on some properties and denture base adaptation of heat cured acrylic resin denture base material
od: Ali MA Aljafery, et al.
Izdano: (2015)

The influence of adding of modified ZrO2-TiO2 nanoparticles on certain physical and mechanical properties of heat polymerized acrylic resin
od: Tiba A Salman, et al.
Izdano: (2015)

In Vitro Assessment of Artificial Aging on the Antifungal Activity of PMMA Denture Base Material Modified with ZrO2 Nanoparticles
od: Shorouq Khalid Hamid, et al.
Izdano: (2021)

Multilayered PMMA Dental Material Reinforced with Electrospun PVP/ZrO2 Composite Nanofiber Fabrics with Enhanced Flexural Properties
od: Serife Akkoyun, et al.
Izdano: (2022)

Impact strength and dimensional accuracy of heat-cure denture base resin reinforced with ZrO2 nanoparticles: An in vitro study
od: S Sajida Begum, et al.
Izdano: (2019)

Gadolinium-doped hollow CeO2-ZrO2 nanoplatform as multifunctional MRI/CT dual-modal imaging agent and drug delivery vehicle
od: Zuwu Wei, et al.
Izdano: (2018)

Tribology Lubricants and Lubrication
Izdano: (2011)

Evaluating the physical properties of microwave-cured and heat-cured acrylic denture base materials after the addition of ZrO2 nanoparticles.
od: Radhwan H Hasan, et al.
Izdano: (2024)

The effect of addition nano particle ZrO2 on some properties of autoclave processed heat cure acrylic denture base material
od: Hussein K Hameed, et al.
Izdano: (2015)

Histological Assessment of Early Bone-Response to ZrO2 Implant Accompanied by CaSO4.0.5H2O as a Bone Substitute
od: Ghufran Muslim Al-Banaa, et al.
Izdano: (2021)

PEMBUATAN SENSOR GAS ETANOL KERAMIK FILM TEBAL Fe2O3 YANG DIDOPING 5% ZrO2 DENGAN MENGGUNAKAN METODA SCREEN PRINTING
od: Alfih Riski Anugrah, -
Izdano: (2011)

The effect of adding ZrO2 nanoparticles on the transverse strength and hardness of microwave-cured acrylic and heat-cured acrylic denture base materials
od: Marwah M. Shehab, et al.
Izdano: (2024)

Assessment of the correlation between the tensile and diametrical compression strengths of 3D-printed denture base resin reinforced with ZrO2 nanoparticles
od: Marwa F Al-Sammraaie, et al.
Izdano: (2024)

Modelling of material removal rate in electro discharge machining of nonconductive ZrO₂ Ceramic with kerosene and EDM oil dielectric fluid / Abdus Sabur ... [et al.]
od: Sabur, Abdus
Izdano: (2014)

Comparison of the Performance of AOP Method Using O3/H2O2 in the Presence of TiO2 and ZrO2 Nano Particles Stabilized on Pumice for the Removal of Pentachlorophenol from Aquatic Solution: Kinetic Studies
od: Reza Shokoohi, et al.
Izdano: (2018)

The effect of thermocycling and different pH of artificial saliva on the impact and transverse strength of heat cure resin reinforced with silanated ZrO2 nano-fillers.
od: Rola W Abdul-Razaq
Izdano: (2014)

Poly (ε-Caprolactone)/Cellulose Nanofiber Blend Nanocomposites Containing ZrO2 Nanoparticles: A New Biocompatible Wound Dressing Bandage with Antimicrobial Activity
od: Sina khanmohammadi, et al.
Izdano: (2020)

Comparison of misfit and roughness of CAD-CAM ZrO, selective laser sintered CoCr and preformed Ti implant abutment crowns
od: Fahim Vohra, et al.
Izdano: (2024)

Impact of Polymerization Technique and ZrO<sub>2</sub> Nanoparticle Addition on the Fracture Load of Interim Implant-Supported Fixed Cantilevered Prostheses in Comparison to CAD/CAM Material
od: Faris A. Alshahrani, et al.
Izdano: (2022)

Tribology in Materials and Manufacturing Wear, Friction and Lubrication
Izdano: (2021)

Tribology Investigation of Automotive Air Condition (AAC) compressor by using Al2O3/PAG Nanolubricant / A.R.M. Aminullah...[et al.]
od: A.R.M., Aminullah, et al.
Izdano: (2018)

Nine treatments of Metaldehyde in water / Azlina Mat Saad..[et al.]
od: Mat Saad, Azlina, et al.
Izdano: (2018)

Synthesis, characterisation and corrosion inhibition screening of Co(Ii) dithiocarbamate complexes in HCl and H2SO4 / Mimi Wahidah Mohd Radzi ... [et al.]
od: Mohd Radzi, Mimi Wahidah, et al.
Izdano: (2021)

Football Players' Satisfaction: An exploratory factor analysis / Azlina Zid ...[et al.]
od: Zid, Azlina, et al.
Izdano: (2017)

SINTESIS NANOPARTIKEL ZIRKONIUM DIOKSIDA (ZrO2) DENGAN METODE SOL-GEL MENGGUNAKAN EKSTRAK BELIMBING WULUH (Averrhoa bilimbi) SEBAGAI PENGKELAT UNTUK PENINGKATAN HEAT TRANSFER PADA RADIATOR MENGGUNAKAN NANOFLUIDA
od: Arief Rizqiyanto Achmad, -
Izdano: (2018)

Quality green energy supply chain management practices in Malaysian / Argustina Zainuddin...[et al.]
od: Zainuddin, Argustina, et al.
Izdano: (2018)

Mimi's Marriage
od: Veselitskaia, Lidiia Ivanovna, 1857-1936; Wright, C. T. Hagberg (Charles Theodore Hagberg), 1862-1940 [Translator]