कवर छवि

ANALISIS MATERIAL SHRINKAGE PADA INDUSTRI PENGOLAHAN KARET MENGGUNAKAN METODE FAILURE MODE AND EFFECT ANALYSIS (FMEA) DAN FAULT TREE ANALYSIS (FTA)

PT. X is a company engaged in the processing of dirty rubber into clean rubber. Based on company data for January 2019-August 2022, PT. X experienced material shrinkage of 1620 tons with an estimated financial loss of 34.3 billion rupiah. Thus, business process improvements need to be carried out in...

पूर्ण विवरण

में बचाया:

ग्रंथसूची विवरण
मुख्य लेखक:	Afdi Nugraha, (लेखक)
स्वरूप:	पुस्तक
प्रकाशित:	2023-07-06.
विषय:	Thesis NonPeerReviewed
ऑनलाइन पहुंच:	Link Metadata
टैग:	टैग जोड़ें कोई टैग नहीं, इस रिकॉर्ड को टैग करने वाले पहले व्यक्ति बनें!

समान संसाधन

Analisis Pengendalian Kualitas Produk Batik Menggunakan Metode Fault Tree Analysis (FTA) Dan Failure Mode And Effects Analysis (FMEA) (Studi Kasus: Industri Batik Gress Tenan)
द्वारा: Sukma, Ghosa Amorda, और अन्य
प्रकाशित: (2014)

INTEGRASI ANTARA FAULT TREE ANALYSIS (FTA) DAN FAILURE MODE EFFECTS & ANALYSIS (FMEA) DALAM PROSES PERBAIKAN PEWARNAAN BENANG DI PT.IJK
द्वारा: Citra Annisa Adi Luhur Maremy, -
प्रकाशित: (2018)

PENGENDALIAN KUALITAS PROSES PRODUKSI KEMEJA DENGAN METODE FAULT TREE ANALYSIS (FTA) DAN FAILURE MODE AND EFFECT ANALYSIS (FMEA) DI CV.ABC
द्वारा: Rahmi Dwi Fitriani,
प्रकाशित: (2022)

ANALISIS PENYEBAB TIDAK TERCAPAINYA STANDAR WAKTUPELAYANAN LESS CONTAINER LOAD MENGGUNAKAN METODEFAULT TREE ANALYSIS (FTA) DAN FAILURE MODE EFFECT &ANALYSIS (FMEA) DI PT. XYZ
द्वारा: Kevin Yosafat Leonardo Sidabutar,
प्रकाशित: (2020)

An application of failure mode and effect analysis (FMEA) to assess risks in petrochemical industry in Iran
द्वारा: Mehdi Kangavari, और अन्य
प्रकाशित: (2015)

An application of failure mode and effect analysis (FMEA) to assess risks in petrochemical industry in Iran
द्वारा: Mehdi Kangavari, और अन्य
प्रकाशित: (2015)

ANALISIS KETERLAMBATAN PERAWATAN SHAFT PROPELLER DENGAN METODE FTA DAN FMEA
द्वारा: Adrian Diko Ananto,
प्रकाशित: (2022)

The study of Influencing Maintenance Factors on Failures of Two gypsum Kilns by Failure Modes and Effects Analysis (FMEA)
द्वारा: Iraj Alimohammadi, और अन्य
प्रकाशित: (2014)

Failure Mode and Effect Analysis (FMEA) Application for Safety Risk Assessment Design of "X" Bakery
द्वारा: Rizky Fajri Ramadhan, और अन्य
प्रकाशित: (2019)

Use and effectiveness of the Failure Modes and Effects Analysis (FMEA) for identification of potential errors and failures in the process of root canal treatment
द्वारा: Mohsen Yazdanian, और अन्य
प्रकाशित: (2022)

Risk Assessment of the Processes of Operating Room Department using the Failure Mode and Effects Analysis (FMEA) Method
द्वारा: Zahra Kavosi, और अन्य
प्रकाशित: (2017)

The Potential Failure Modes and Effects Analysis (FMEA) of the Nursing Care Processes in One of the Sub Specialty Hospitals in Isfahan
द्वारा: Mahan Mohammadi, और अन्य
प्रकाशित: (2017)

Proactive Risk Assessment Through Failure Mode and Effect Analysis (FMEA) for Haemodialysis Facilities: A Pilot Project
द्वारा: Raffaele La Russa, और अन्य
प्रकाशित: (2022)

EVALUASI KEANDALAN PEMUTUS TENAGA KUBIKEL OUT GOING 20 KV MENGGUNAKAN METODE FAILURE MODE AND EFFECT ANALYSIS (FMEA)
द्वारा: Yadi Mulyana, -
प्रकाशित: (2018)

Identification and Assessment of Occupational Risks in Mechanized Excavation of Metro Tunnel using the Failure Mode and Effects Analysis Technique (FMEA)
द्वारा: Kamran NAJAFI, और अन्य
प्रकाशित: (2017)

Analysis of failure modes and solutions in the process of post open-heart surgery using Fuzzy FMEA and Fuzzy TOPSIS Techniques
द्वारा: shima Tasharoei, और अन्य
प्रकाशित: (2019)

ANALISIS DAN IDENTIFIKASI KERUSAKAN PADA MESIN BUBUT DENGAN METODE FAILURE MODE AND EFFECT ANALYSIS DAN FAULT TREE ANALYSIS (Studi Kasus di UD. Kian Maju Desa Karangasem)
द्वारा: HIDAYATULLOH, ARFAN
प्रकाशित: (2011)

ANALISIS KECELAKAAN INDUSTRI MENGGUNAKAN METODE HAZOP, FTA, DAN FISHBONE DIAGRAM
द्वारा: Nico Adik Setyawan,
प्रकाशित: (2021)

Effect of light-curing units and activation mode on polymerization shrinkage and shrinkage stress of composite resins
द्वारा: Lawrence Gonzaga Lopes, और अन्य
प्रकाशित: (2008)

Application of failure mode and effects analysis (FMEA) to improve medication safety in the dispensing process - a study at a teaching hospital, Sri Lanka
द्वारा: J. A. L. Anjalee, और अन्य
प्रकाशित: (2021)

ANALISIS PENGENDALIAN KUALITAS PROSES CASTING BLOK MESIN Z DENGAN METODE QUALITY CONTROL CIRCLE (QCC), FTA, DAN FMEA DI PT. X
द्वारा: Rayhan Fajar Sularso,
प्रकाशित: (2023)

PENGEMBANGAN RISK ASSESSMENT DALAM EVALUASI MANAJEMEN PENANGGULANGAN KEBAKARAN MELALUI FAULT TREE ANALYSIS
द्वारा: Annisa Sholikhatul Addawiyah, और अन्य
प्रकाशित: (2016)

ANALISIS KEANDALAN PERALATAN PENGAMAN JARINGAN DISTRIBUSI DENGAN METODE FAILURE MODE AND EFFECT ANALYSIS (FMEA) PLN AREA BANDUNG RAYON BANDUNG SELATAN
द्वारा: Armansyah Ibrahim, -
प्रकाशित: (2018)

Assessing food system vulnerabilities: a fault tree modeling approach
द्वारा: Gwen M. Chodur, और अन्य
प्रकाशित: (2018)

Effect of the composite curing light mode on polymerization shrinkage of resin composites
द्वारा: Diğdem Eren, और अन्य
प्रकाशित: (2012)

Preventing blood transfusion failures: FMEA, an effective assessment method
द्वारा: Zhila Najafpour, और अन्य
प्रकाशित: (2017)

DIPLOMASI INDONESIA UNTUK MENINGKATKAN EKSPOR PENGOLAHAN KARET INDONESIA KE JEPANG PERIODE 2012-2015
द्वारा: Claudya Andriaty, -
प्रकाशित: (2017)

Comparative analysis of the shrinkage stress of composite resins
द्वारा: Rosana Aparecida Pereira, और अन्य
प्रकाशित: (2008)

Data-Driven Fault Detection and Reasoning for Industrial Monitoring
द्वारा: Wang, Jing, और अन्य
प्रकाशित: (2022)

Data-Driven Fault Detection and Reasoning for Industrial Monitoring
द्वारा: Wang, Jing
प्रकाशित: (2022)

Data-Driven Fault Detection and Reasoning for Industrial Monitoring
द्वारा: Wang, Jing
प्रकाशित: (2022)

ANALISIS FAILURE MODE EFFECT (FMEA) PADA PENGADAAN OBAT DAN PERBEKALAN KESEHATAN PADA ERA JAMINAN KESEHATAN NASIONAL DI PUSKESMAS WONOKROMO SURABAYA
द्वारा: Nuning Farida, और अन्य
प्रकाशित: (2021)

New Perspectives in Overcoming Bulk-Fill Composite Polymerization Shrinkage: The Impact of Curing Mode and Layering
द्वारा: Zsuzsanna Bardocz-Veres, और अन्य
प्रकाशित: (2024)

At Fault
द्वारा: Chopin, Kate, 1850-1904

Failure mode and effects analysis outputs: are they valid?
द्वारा: Shebl Nada, और अन्य
प्रकाशित: (2012)

Degree of conversion and polymerization shrinkage of low shrinkage bulk-fill resin composites
द्वारा: Haidy N Salem, और अन्य
प्रकाशित: (2019)

Fault Detection
प्रकाशित: (2010)

Nobody's fault
द्वारा: Syrett, Netta, 1865-1943

Sociopragmatic Analysis Of Commissive Utterances Used In The Fault In Our Stars
द्वारा: Arga Kurniawan, Kancah Mandra Ac, और अन्य
प्रकाशित: (2016)

Case Report: Right Heart Failure Mistaken for Obesity-A Fault of Telemedicine
द्वारा: Anna Sabiniewicz, और अन्य
प्रकाशित: (2022)