PERANCANGAN SUDU HORIZONTAL AXIS WIND TURBINE PADA KECEPATAN ANGIN 6-12 m/s
Wind is an example of renewable energy, the potential of wind energy in Indonesia is quite adequate, because the average wind speed can reach 3.5-12 m / s. In the Horizontal Axis Wind Turbine there are 3 types of blades that can be used where each blade has a match of the characteristics of the wind...
Saved in:
| Main Author: | |
|---|---|
| Format: | Book |
| Published: |
2020-06-24.
|
| Subjects: | |
| Online Access: | Link Metadata |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
MARC
| LEADER | 00000 am a22000003u 4500 | ||
|---|---|---|---|
| 001 | repoupnvj_7165 | ||
| 042 | |a dc | ||
| 100 | 1 | 0 | |a Dimas Dwi Atmaja Putra, . |e author |
| 245 | 0 | 0 | |a PERANCANGAN SUDU HORIZONTAL AXIS WIND TURBINE PADA KECEPATAN ANGIN 6-12 m/s |
| 260 | |c 2020-06-24. | ||
| 500 | |a http://repository.upnvj.ac.id/7165/1/ABSTRAK.pdf | ||
| 500 | |a http://repository.upnvj.ac.id/7165/7/AWAL.pdf | ||
| 500 | |a http://repository.upnvj.ac.id/7165/20/BAB%201.pdf | ||
| 500 | |a http://repository.upnvj.ac.id/7165/18/BAB%202.pdf | ||
| 500 | |a http://repository.upnvj.ac.id/7165/17/BAB%203.pdf | ||
| 500 | |a http://repository.upnvj.ac.id/7165/19/BAB%204.pdf | ||
| 500 | |a http://repository.upnvj.ac.id/7165/15/BAB%205.pdf | ||
| 500 | |a http://repository.upnvj.ac.id/7165/16/DAFTAR%20PUSTAKA.pdf | ||
| 500 | |a http://repository.upnvj.ac.id/7165/2/RIWAYAT%20HIDUP.pdf | ||
| 500 | |a http://repository.upnvj.ac.id/7165/13/LAMPIRAN.pdf | ||
| 500 | |a http://repository.upnvj.ac.id/7165/6/ARTIKEL%20KI.pdf | ||
| 520 | |a Wind is an example of renewable energy, the potential of wind energy in Indonesia is quite adequate, because the average wind speed can reach 3.5-12 m / s. In the Horizontal Axis Wind Turbine there are 3 types of blades that can be used where each blade has a match of the characteristics of the wind. Therefore a different design is needed so that the wind turbine can work optimally. The design is carried out with the help of software and has a turning radius of 1 m, the maximum length of the chord is 0.101 m and the angle of attack ranges from 2.5-7.5 °. Based on the results of the rotor simulation, the type of taper blade is capable of producing greater power compared to the 2 other types of inverse taper blades, and taper. The taper blade is capable of producing power of 1630 Watt at 750 rpm using the SG 6043 airfoil profile with 3 blades. | ||
| 546 | |a id | ||
| 546 | |a id | ||
| 546 | |a id | ||
| 546 | |a id | ||
| 546 | |a id | ||
| 546 | |a id | ||
| 546 | |a id | ||
| 546 | |a id | ||
| 546 | |a id | ||
| 546 | |a id | ||
| 546 | |a id | ||
| 690 | |a QA76 Computer software | ||
| 690 | |a TJ Mechanical engineering and machinery | ||
| 690 | |a TL Motor vehicles. Aeronautics. Astronautics | ||
| 655 | 7 | |a Thesis |2 local | |
| 655 | 7 | |a NonPeerReviewed |2 local | |
| 787 | 0 | |n http://repository.upnvj.ac.id/7165/ | |
| 787 | 0 | |n http://repository.upnvj.ac.id | |
| 856 | 4 | 1 | |u http://repository.upnvj.ac.id/7165/ |z Link Metadata |